Touch Detector IC TTP224B-BSBN SSOP-16 4 Key Touch Pad Sensor Chip
Description
The TTP224B-BSBN/TTP224B-BSB TonTouchTM IC is capacitive sensing design specifically for touch pad controls. The device built in regulator for touch sensor. Stable sensing method can cover diversity conditions. Human interfaces control panel links through non-conductive dielectric material. The main application is focused at replacing of the mechanical switch or button. The ASSP can independently handle the 4 touch pads with 4 direct output pins
Feature
- Operating voltage 2.0V ~ 5.5V
- Operating current, @VDD=3V no load
- At low power mode typical 2.0uA, maximum 4.0uA
- The response time max about 220mS at low power mode @VDD=3V
- Sensitivity can adjust by the capacitance(1~50pF)outside
- Stable touching detection of human body for replacing traditional direct switch key
- Provides Low Power mode
- Provides direct output or toggle output selection by pin option (TOG pin)
- Q pin is CMOS output can be selected active high or active low by pin option (AHLB pin)
- After power-on have about 0.5sec stable-time, during the time do not touch the key pad, and the function is disabled
- Auto calibration for life
- The re-calibration period is about 1 sec within 8 sec after power-on. When key has been
- touched within 8 sec or key has not been touched more than 8 sec after power-on, then the
- re-calibration period change to 4 sec
Applications
- Wide consumer products
- Button key replacement
Series item
TTP224B TTP224B-BSBN TTP224B-COBN TTP224B-SQBN TTP224B-RO8N TTP224B-BCBN TTP224B-RC8N