CE ISO Certificates Approved Top Designed Quality Food and Beverage Using Clean Room Cranes and Hoists

Brief Introducion:

Serving a wide range of industries, from waste water treatment and ash handling to aerospace and shipping, our team can easily meet various industry-specific compliance and regulations, and our China industry-leading clean room offerings are designed to meet the stringent standards set forth by China Beijing satellite manufacture factory . The whole complete crane structure was welded by stainless steel.

Clean Room Basics:

Products with sensitive components and production processes often require the use of hygienic rooms during the manufacturing process; these environments are kept free from dust, airborne microbes, chemical vapors, and other environmental contaminants.

Depending on the application, a specified level of contamination is set and must be adhered to.

Before the International Standards Organization (ISO) adopted standards, nearly all sanitary rooms were governed by GB5033-2002(100000 grade), which specifies cleanliness classification levels.

International standard ISO 14644-2, which is expected to eventually completely replace FS209E, describes the type and frequency of testing needed to meet certain standards and is the most common standard used today.

It is applied to be used in the following industries:

Aerospace

Food and beverage

Electronics

Medical technology

Pharmaceuticals

Safety Devices for gantry crane:

To guarantee the normal operation of crane and avoid the personal casualty and mechanical damage, the safety device we provide are not only the electric protective devices or alarm bell but also other

equipments as following:

1.Overload Limit Switch

2. Rubber Buffers

3.Electric Protective Devices

4.Emergency Stop System

5.Voltage Lower Protection Function

6. Current Overload Protection System

7. Rail Anchoring

8.Lifting Height Limit Device

MD Crane Cases in China Domestic and International Market:

Company certificates:

MD Crane will do more than the certificates required to guarantee the quality of our cranes.

FAQ ABOUT MD CRANES:

1.Can the cranes be customized?

Yes,every customer’s working condition is different, all of our products can be customized depend on customers’ requirements. Please give us the information as clear as you can, so we can give our best design to suit for your demands.

2.How many operation methods for my selections?

We provide pendent controller with push button control type, remote control type or cabin control type.Please tell us what kind of operation way you need.

4.I have low headroom in my workshop, is it possible to install a crane in it?

We have special products for low headroom workshop, our engineer can give the best design according to your dimensions.

5.Do you supply lift tools?

Yes, we can provide any kind of lifting tools such as hook, electromagnetic, grab bucket etc...

6.In order to offer the most suitable design solution for you, it will be great helpful if you can offer us the following information to us:

1. Lifting capacity.

2. Span length.(rail center to rail center)

3. Lifting height.(hook center to ground)

4. Have you installed the rails? Do you need us to supply the rails? How long is it?

5. Power supply: Voltage.

6. Working condition: what kind of material to lift? temperature?

7. It would be much better if it is possible for you to offer the drawing photo of your workshop.

Workshop Overall View Photo:

Customized Design &Production Accepted According to Your Using

Situation, Please Contact Us for Further Communication:

Email/Skype: sales@md-cranes.com

Tel/whatsapp:+8613953895525

Or

Just send inquiry to us, we will do the rest for you!