Specifications
Brand Name :
YUE MI
Model Number :
WALRUS-12mm WALRUS-16mm
Certification :
ISO SGS
Place of Origin :
Guangzhou, China
MOQ :
1/PCS
Price :
US $ 68~78/PCS
Payment Terms :
L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability :
1000/Set/Month
Delivery Time :
2 word days
Packaging Details :
Details Carton
Pump :
WALRUS TPH pump
Shaft diameter :
WALRUS-12mm WALRUS-16mm
Secondary Sealing :
Fkm EPDM
Description

Taiwan WALRUS TPH stainless steel vertical multi-stage pump mechanical seal/containerized WALRUS/TPH2T/4T/8T/12TTaiwan WALRUS TPH stainless steel vertical multi-stage pump mechanical seal/containerized WALRUS/TPH2T/4T/8T/12TTaiwan WALRUS TPH stainless steel vertical multi-stage pump mechanical seal/containerized WALRUS/TPH2T/4T/8T/12T

Taiwan WALRUS TPH stainless steel vertical multi-stage pump mechanical seal/containerized WALRUS/TPH2T/4T/8T/12T


Preperation:
1. Shaft Outside Diameter is within tolerance +-0.05mm
2. Shaft run out <0.1mm
3. Shaf end float <0.13mm
4, No sharp edges on the shaft over the o ring


Note:
During the installation,don't scratch or damage the o ring.lf anything is damaged,please contactwith Us to replace a new one.


Installation in strucstions:
1. The full set of cartridge seal is cleaned and exactly passed leakage examine before sale.Inorder to avoid damage,don't disassemble and clean the parts again before fixing.

2 The fitting allowance between the seal and shaft is dl h6 0.8,and there should be leading-inedge at the end of shaft.The outside diameter of shaft at the position of screw should be 01 0.2mm smaller,resisting the screw over-tighten.Lubricate the shaft with oil

3. Place the cartridge seal into the pump chamber,then:
A: Tighter four screw bolts of flanges,ensuring the medium leading in hole"G"at the top Position

B : Tighter four set screws and position the shaft sleeve on the shaft.
C: Remove four gauge plates.Please keep them and they wil be used in future installation and
disassemble.
D: Connect the medium lead_in pipe with hole"G"in order to flush away the friction heat and
flushing the seal chamber when pump running.


Note:
ter complete the installation,turning the shaft by hand to check for the rotationi he shat could not rotate smoothily,seal had been improperly installed.

Taiwan WALRUS TPH stainless steel vertical multi-stage pump mechanical seal/containerized WALRUS/TPH2T/4T/8T/12T

We would like lo sincerely ooperale with Clients to supply high qually products and senice We beleve in establishing a long:erm cooperalive relalionshipis lhe key to suceess

Taiwan WALRUS TPH stainless steel vertical multi-stage pump mechanical seal/containerized WALRUS/TPH2T/4T/8T/12T

Taiwan WALRUS TPH stainless steel vertical multi-stage pump mechanical seal/containerized WALRUS/TPH2T/4T/8T/12T

Send your message to this supplier
Send Now

Taiwan WALRUS TPH stainless steel vertical multi-stage pump mechanical seal/containerized WALRUS/TPH2T/4T/8T/12T

Ask Latest Price
Brand Name :
YUE MI
Model Number :
WALRUS-12mm WALRUS-16mm
Certification :
ISO SGS
Place of Origin :
Guangzhou, China
MOQ :
1/PCS
Price :
US $ 68~78/PCS
Contact Supplier
Taiwan WALRUS TPH stainless steel vertical multi-stage pump mechanical seal/containerized WALRUS/TPH2T/4T/8T/12T
Taiwan WALRUS TPH stainless steel vertical multi-stage pump mechanical seal/containerized WALRUS/TPH2T/4T/8T/12T
Taiwan WALRUS TPH stainless steel vertical multi-stage pump mechanical seal/containerized WALRUS/TPH2T/4T/8T/12T

YUEMI

Verified Supplier
2 Years
guangdong, guangzhou
Since 2002
Total Annual :
3000000-5000000
Employee Number :
50~80
Certification Level :
Verified Supplier
Contact Supplier
Submit Requirement