DWDM MUX / DEMUX
Fiberroad‘s DWDM Mux/Demux is used to provide transport solution for DWDM networking system. The Fiberroad‘s Fiber Driver Passive MUX/DeMUX modules are available with 2, 4, 8, or 16 independent wavelengths. Each single-slot highdensity module installs in any Fiberroad‘s chassis. A powered chassis is required only for managed applications.
Product Features
Passive MUX/DeMUX-4 , 8, 16 channels
DWDM C-Band, 100GHz ITU Grid (0.8nm spacing)
Transparent operation - protocol and topology independent
Secure physical separation between data channels
Low insertion loss
Power required only for managed applications and LEDs
High port densitym
FR8000 chassis compatibility
Fit FR8000-CH01 1-slot powered chassis
Fit FR8000-CH08 8-slot powered chassis
Fit FR8000-CH16 16-slot powered chassis
Performance Parameters
Parameter | 4 Channel | 8 Channel | 16 Channel | |
Channel Wavelength (nm) | ITU 100GHz Grid | |||
Center wavelength Accuracy (nm) | ±0.1 | |||
Channel Spacing (nm) | 100 | |||
0.5db Passband (nm) | >0.25 | |||
Insertion Loss (dB) | ≤1.8 | ≤3.2 | ≤4.0 | |
Channel Uniformity (dB) | ≤0.6 | ≤1.0 | ≤1.5 | |
Channel Ripple (dB) | 0.3 | |||
Isolation (dB) | >30 | |||
Inertion Loss Temperature Sensitivity (dB/℃) | <0.005 | |||
Wavelength Temperature Shifting (nm/℃) | <0.002 | |||
Polarization Dependent Loss (dB) | <0.1 | <0.1 | <0.15 | |
Polarization Mode Dispersion | <0.1 | |||
Directivity (dB) | >50 | |||
Return Loss (dB) | >45 | |||
Maximum Power Handling (mw) | 300 | |||
Size | OTU Module | 26.5(W)x252(D)x195(H)(mm) | ||
1-slot chassis | 482.6(W)x350(D)x43.6(H)(mm) | |||
8-slot chassis | 482.6(W)x350(D)x109(H)(mm) | |||
16-slot chassis | 482.6(W)x350(D)x261.6(H)(mm) | |||
Opterating Temperature (℃) | -5~+75 | |||
Storage Temperature (℃) | -40~85 |
Typical 4-wavelength passive MUX / DeMUX module application
Ordering Information:
FR8000-X X-X
1 2 3
1 | FR8000-OD: DEMUX module FR8000-OM: MUX module |
2 | xx:Such as 02 represent two channels |