24 Port Managed Poe Network Switch SFP TX , 4 Gigabit Poe Switch

FIBERROAD FR-POE-H24P4GS POE switch is a new generation of L2 POE switches with high performance, multiservice, high reliability and high security t. It support all kinds of connections varying from 10/100M to 1000M, so the network can be configured flexibly according to actual needs. FR-POE-H24P4GS POE switches can access all Ethernet or fast-Ethernet devices, so they can be very compatible with the existing devices..

The POE switches support the 802.3af or 802.3at power supply, so they are suitable for all scales of POE application cases. The gigabit uplink optical port of FR-POE-H24P4GS supports 100M/1000M optical module adaptation and can be applied on flexible networking environment.


Excellent performance

• 32Gbps backplane bandwidth, hardware forwarding and wire-speed L2 packet forwarding rate
• Gigabit optical-fiber transmission with up to 80Km distance and directly connecting the MAN backbone network

High security and reliability

• Providing multiple user authentication modes such as 802.1x authentication
• Powerful ACL and hardware supporting L2 to L7 data filtration
• Port-MAC-IP bind
• Special ARP invasion detection to effectively stop ARP cheat
• Hardware IPv6 ACL

Flexible and various management modes

• Automatically identifying the straight-through cable and the intercrossed cable
• Adopting the cluster technology; supporting device cascading; managing uniquely through a unique IP address; saving address resources
• Multiple management modes such as Console port, Telnet, Web and SNMP are supported.
• Supporting multiple general network management protocols like Broad Drictor, HP Open View and Cisco Works 2000

Powerful flow and broadcast management

• Detecting and limiting broadcast storms automatically and supporting IGMP snooping to limit broadcast flooding
• Supporting flow control in full-duplex mode or half-duplex mode
• The rate limitation in a minimum step of 64K is supported on the Ethernet interface.
• Supporting IP multicast and QoS
• Flexible QinQ realizes the QinQ function based on the five-element group.

Varied protocols

• POE switches support 802.3af power supply on all their ports.
• POE switches already support 802.3at power supply. The maximum power supply on each port can reach up to 30W.
• POE switches support the configuration of power-supply priority, guaranteeing continuous power supply at those key network nodes.
• The POE switches support configuring the power consumption of power supply on their ports, saving the power and reducing users’ cost.

Technical Indexes

Typical Application:

Application in POE networking

WirelessCityis recently under construction and WLAN is gradually becoming a necessary part of life. After inheriting the powerful data transmission ability, high security and reliability and flexible management mode from traditional Fiberroad switches, Fiberroad WLAN networking solution has sharp competition and advantages. On the access layer Fiberroad FR-POE-H24P4GS POE switches are adopted and the gigabit uplink can be achieved. The following functions are also supported: broadcast storm limit, ACL, ARP filter, DDOS attack prevention, DHCP-snooping and so on. All these functions guarantee the security and reliability of the intranet.
At the same time WLAN bandwidth is gradually upgraded to 802.11N in which the POE power supply with higher power consumption is required, while Fiberroad POE switches have already realized 802.3at so that the requirements of 802.11N can be met.

Application in Government

Government’s networks generally have high demand on security and reliability, while Fiberroad FR-POE-H24P4GS switch has sound ARP attack prevention, VLAN, ACL, and Filter, so they are free of broadcast storms, and provide a secure and reliable network application environment for stable running.


Order Information