Product Name

Portable Medical Home LED Screen Clear Reading Fingertip Pulse Oximeter

Feature

ACCURATE, FAST AND RELIABLE - the CMS 50 DL Fingertip Pulse Oximeter accurately determines your SpO2 in less than 8 seconds

SPORT/HEALTH ENTHUSIASTS - For aviators, sporting enthusiasts, skiers, bikers, or high altitude climbing, the CMS 50 DL is a RELIABLE companion for quick and easy readings for oxygen saturation

THE ORIGINAL STANDARD - Setting the original standard for reliable and consistent pulse oximetry, the CMS 50 DL is backed by an ironclad 12-month warranty

PACKED WITH ACCESSORIES - Includes 2X AAA batteries that enable use out of the box, a pulse oximeter case to protect the device when not in use, and a LANYARD for convenience as either a wrist strap or to be worn around the neck

DESIGNED For Sports and Aviation Enthusiasts and can be used as a heart rate monitor

How to ensure the accuracy of your measurement?

1, Moving too fast will affect the accuracy; try to stay still while waiting for your reading.

2, When the oxygen saturator and the heart are at the same level, the measurement results are optimal.

3, Avoid nail polish or long nails on the finger used for the reading. Fingers should not be wet at all either.

4, Ring finger, middle finger and index finger are recommended as suitable monitor position

Function Specification

Environment Requirements

Storage Environment

a) Temperature :-40℃~+60℃

b) Relative humidity :<95%

c) Atmospheric pressure :500hPa~1060hPa

Operating Environment

a) Temperature :10℃~40℃

b) Relative Humidity :s75%

c) Atmospheric pressure :700hPa~1060hPa

1) Display Format: OLED Display;

SpO₂ Measuring Range: 0%- 100%;

Pulse Rate Measuring Range: 30 bpm - 250 bpm;

Pulse Wave Display: columniation display and the waveform display.

2) Power Requirements: 2 x1.5V AAA alkaline battery(or using the

rechargeable battery instead), adaptable range: 2.6V~3.6V.

3) Power Consumption: Smaller than 30mA.

4) Resolution: 1% for SpO₂ and 1 bpm for Pulse Rate.

5) Measurement Accuracy: ±2% in stage of 70%-100% SpO₂ , and

meaningless when stage being smaller than 70%.±2 bpm or±2%

(select larger) for Pulse Rate.

6) Measurement Performance in Weak Filling Condition:

SpO₂ and pulse rate can be shown correctly when pulse-filling ratio

is 0.4%. SpO₂ error is ±4%, pulse rate error is +2 bpm or±2% (select larger).

7) Resistance to surrounding light: The deviation between the value

measured in the condition of man-made light or indoor natural light and that

of darkroom is less than ±1%.

8) It is equipped with a function switch. The Oximeter can be powered off in

case no finger is the Oximeter within 5 seconds.

9) Optical Sensor

Red light (wavelength is 660nm, 6.65mW)

Infrared (wavelength is 880nm, 6.75mW)

Troubleshooting