Product Name

Medical Blood Oxygen Saturation Pulse Monitoring Home Heartbeat Heart

Rate Detector Oximeter Finger Clip

Function Specification

Troubleshooting

Warning

1,The uncomfortable or painful feeling may appear if using the device ceaselessly, especially for the microcirculation barrier patients. It is recommended that the sensor should not be applied to the same finger for over 2 hours.

2,For the individual patients, there should be a more prudent inspecting in the placing process. The device can not be clipped on the edema and tender tissue.

3,The light (the infrared is invisible) emitted from the device is harmful to the eyes, so the user and the maintenance man, can not stare at the light.

4,Testee can not use enamel or other makeup.

5,Testee's fingernail can not be too long.

6,Please peruse the relative content about the clinical restrictions and caution.

7,This device is not intended for treatment.

Operating Guide

1) Insert the two batteries properly to the direction, and then replace the cover.

2) Open the clip as shown in Figure 5.

3) Let the patient's finger put into the rubber cushions of the clip (make sure the finger is in the right position), and then clip the finger.

4) Press the switch button once on front panel.

5) Do not shake the finger and keep t he patient at ease during the process. Meanwhile, human body is not recommended in movement status.

6) Get the infonnation directly from screen display.

7) The button has three functions. When the device is power off, pressing the button can open it; When the device is power on, pressing the button shortly can change direction of the screen; When the device is power on, pressing the button long can change brightness of the screen

► Fingern ails and the luminescent tube should be on the same side