Medical Electronic Non Contact Forehead Ear Body Temperature Forehead Infrared Thermometer
Product Advantages
Non-contact
The digital thermometer medical measures within 1-10 cm distance, refuse to contact. It is also made by healthy material, safer and healthier.
Quick measurement
Quickly measure the temperature in 1 second, especially the forehead reading, even if it's the rest time, you will not disturb him.
Fever Indicating System
Equipped with fever warning system, the thermometer for fever will indicate temperature status with corresponding red lights and beeps.
Multipurpose
The non-contact forehead thermometer is also suitable for body, milk, bath water, barbecue, barbecue wine, food storage temperature.
Model | ZLK-IRT101 |
Display resolution | 32.2℉/ 0.1℃ |
Body temperature mode | ±32.36℉ / ±0.2℃ |
Measuring range | ( 89.6℉ ~ 107.6℉ ) /( 32℃~42℃ ), body mode; ( 32℉ ~ 212℉ ) /( 0℃~100℃ ), object mode |
Measuring distance | 1-10cm |
Operating ambient temperature | ( 50℉ ~ 104℉ ) /( 10℃~40℃ ) |
Operating ambient humidity | ≤80%RH |
Storage temperature range Reading memory storage | ( -13℉ ~ 131℉ ) /( -25℃~55℃ ) 32 groups |
Power | DC3V |
Battery | 2X AAA alkaline dry battery |
IP rating | IP20 |
Dimension | 116x55x170mm (LxWxH) |
Weight | 150g ( without battery ) |
Validity | 3 years |
Quality Guarantee
As we are factory, we can guarantee our price is first-hand, very cheap and competitive.
To make sure customer buy good quality material and service from us. Before customer place order,welcome to visit our factory for approval. Before shipment, our QC staff will
Quality Control
Incoming quality inspection
Quality inspection of all assembly and procurement materials according to standards
Reliability test
a. Component stress test
b. Hardware reliability test
c. Automated software reliability test
d. Real environment simulation test
Process control: mutual check process in assembly line
a. Process quality management
b. Independent inspection by operators
c. Process inspection
d. Handling abnormal quality
e. Segmentation and identification of bad products, bad statistics
Maintenance and precautions
Please keep the sensor and probe chamber clean, otherwise it will affect the accuracy of measurement.
Cleaning methods:
Surface cleaning: wipe the dirt with clean soft cloth or cotton silk with a little medical alcohol or water.
Sensor and chamber cleaning: gently wipe probe chamber or sensor top with clean soft cloth or cotton stick with a little medical alcohol. It can only be used after the alcohol is fully utilized.
Before using, please read the instructions carefully and make sure that the battery is installed .
It is forbidden to immerse the thermometer in any liquid. It is forbidden to keep the thermometer in excessive high or low temperature for a long time.
Do not disassemble the thermometer body.
Thermometers should not be used under the sun or in water.
Please do not use in the environment with strong electromagnetic interference.
Place the thermometer in a position that the child can not touch.
It is suggested to practice many times to familiarize ourselves with measurement methods and try not to change the factory settings of products.
The result of measurement can not replace the doctor’s diagnosis.
There is no need for special maintenance during use. If there is a malfunction, please contact the seller or manufacturer.
Please dispose of the waste and residue at the end of the service life of the product according to local laws and regulations.