High Quality Wall Mounted Refillable Large Capacity Automatic Plastic Liquid Soap Dispenser for Bathroom and Kitchen

Product description

Rapid liquid extraction

removable back panel

Automatic sensing

infrared induction, contact free drainage and rejection of cross infection, distant sensing

single liquid output 1ml, no waste of quantitative liquid output

Application scenarios

It is suitable for kitchens,washrooms,bathrooms,schools,kindergartens,offices,restaurants , bars , Internet cafes , KTV , supermarkets , hospitals and other public occasions or at home . Wash your hands every day can help you reduce the chance of bacteria breeding and spreading.

• Safe&Environment Simple Human Touchless Foam Soap Dispenser: Simple Human Soap Dispenser Automatic Using High-Performance Motor and Infra Red Detection, Durable ABS+PC Material, with good impact resistance and corrosion resistance, Suitable for Hospital, Kitchen, Bathroom, Barber Shop, and Toilet of Restaurant, Hotel, Office,

• Automatic Hand Sanitizer Dispenser Wall Mounted: Automatic Hand Sanitizer Dispenser Wall Mounted with Sensor, Put your hand under the sensor 8-12cm, and let the dispenser to start working for continuously until liquid soap come out from nozzle, Fast hand disinfection and prevent cross infection

• White Automatic Soap Dispenser with Transparent Water Tank Design: 600ml capacity container-practical transparent Design, Open Soap Dispenser cover and refilling soap or foam to the container, You can see the remaining volume in real time. which is powered by 4 AA batteries, sanitizer dispenser have low voltage indicator, when you find LED light twinkle continually while dispenser on standby mode, battery replace is necessary.

• Leak-Proof Design of Refillable Sensor Pump Hand gel Dispensador: Hand gel Pump Dispensador with Spray Head Using Leak-Proof Design, Prevent liquid dripping and maintain hygiene, Low consumption, safety, convenience, Cleanness. Soap dispenser is suitable for soap liquid, Foam dispenser is suitable for foam liquid, It can't be mixed,

Installation

Choose a suitable place to install this dispenser,do not install it on the mirror surface and keep 40cm free from sensor

1. Pull mounting plate down out of the back.

2. Mark three holes,then drill three.

3. Fix the mounting plate firmly on the wall.

4. Open the battery compartment,and put four AA alkaline batteries into the battery compartment to ensure the battery direction is correct.

5. Installing the backplane on the back.

6. Open the top cover and fill in the hand sanitizer.

7. Turn on the power switch.

8. Put your hand on the sensor area at the bottom to work.The first time you use the dispenser,you need to operate it several times to remove the air inside.

9. When the battery power is low,the red LED will flash quickly,indicating that you need to replace the battery