Non-Contact Hand Sanitizer Machine Is Convenient, Safe and Suitable for Public Use

Product description

Rapid liquid extraction

removable back panel

separate design, easy to punch and clean

No drilling

Automatic sensing

infrared induction, contact free drainage and rejection of cross infection, distant sensing

single liquid output 1ml, no waste of quantitative liquid output

• Automatic Hand Sanitizer Dispenser Wall Mounted: Automatic Hand Sanitizer Dispenser Wall Mounted with Sensor, Put your hand under the sensor 8-12cm, and let the dispenser to start working for continuously until liquid soap come out from nozzle, Fast hand disinfection and prevent cross infection(NOTE: When you use dispenser at first time, there was some air in the pump, you need work dispenser several times until liquid soap or foam drop down)

• White Automatic Soap Dispenser with Transparent Water Tank Design: 600ml capacity container-practical transparent Design, Open Soap Dispenser cover and refilling soap or foam to the container, You can see the remaining volume in real time. which is powered by 4 AA batteries, sanitizer dispenser have low voltage indicator, when you find LED light twinkle continually while dispenser on standby mode, battery replace is necessary. (NOTE: this product does’t contain batteries and disinfectan)

• Leak-Proof Design of Refillable Sensor Pump Hand gel Dispensador: Hand gel Pump Dispensador with Spray Head Using Leak-Proof Design, Prevent liquid dripping and maintain hygiene, Low consumption, safety, convenience, Cleanness. Soap dispenser is suitable for soap liquid, Foam dispenser is suitable for foam liquid, It can't be mixed, Can Meet The Needs of Kids/Adult and Any Other Family Members

Application scenarios

It is suitable for kitchens,washrooms,bathrooms,schools,kindergartens,offices,restaurants , bars , Internet cafes , KTV , supermarkets , hospitals and other public occasions or at home . Wash your hands every day can help you reduce the chance of bacteria breeding and spreading.

Installation

Choose a suitable place to install this dispenser,do not install it on the mirror surface and keep 40cm free from sensor

1. Pull mounting plate down out of the back.

2. Mark three holes,then drill three.

3. Fix the mounting plate firmly on the wall.

4. Open the battery compartment,and put four AA alkaline batteries into the battery compartment to ensure the battery direction is correct.

5. Installing the backplane on the back.

6. Open the top cover and fill in the hand sanitizer.

7. Turn on the power switch.