Features:
1. High blood oxygen saturation detection sensitivity, fully supports weak pulse detection
2. Applicable to different groups of people: adults, children, newborns
3. Quickly set the alarm function, support network connection, and set up a monitoring network system
4. Optional configuration: handle, monitor stand cart or wall stand
Specification |
Parameters | ECG, HP, RESP, SPO2, NIBP,TEMP |
Product Size | 20*9*18 cm N.W.:1.46KG |
Packing Size | 24*17*23 cm G.W.:2.4KG |
Apply For | Adult/Pediatric/Neonatal |
Application | Medicine/Surgery/Operating Room/ICU/CCU |
Display | 7 inch LCD Screen |
Operating Environment |
Temperature: | 0 ~ 40 ℃ |
Humidity: | ≦85% |
Pressure: | 86.0 kPa ~ 106.0kPa |
Transport and Storage environment : |
Temperature: | -20 ~ 55 ℃ |
Humidity: | ≦93% |
Pressure: | 86.0 kPa~ 106.0kPa |
Power Requirements |
AC: | 100 ~ 240V, 50Hz/60Hz |
DC: | Built-in rechargeable battery |
Battery: | 11.1V 24wh Li-ion battery; 2h operating after full charge; 5min operating after low battery alarm; |
Date Storage |
Trend diagram/table: | 720h |
NIBP review: | 2000 events |
Wave review: | 12h |
Alarm review: | 200 alarm events |
Analysis: | Support drug concentration titration analysis |
ECG |
5 Leads: | RA, LA, LL, RL, V |
Lead mode: | I, Ⅱ, Ⅲ, AVR, AVL, AVF, V |
Gain: | 0.25mm/mV,0.5mm/mV, 1mm/mV,2mm/mV, (error ≤ 5%) |
Sweep speed: | 12.5mm/s,25mm/s, 50mm/s (error ≤ ± 10%) |
Bandwidth: | Surgery 1 ~ 25 Hz, Monitor 0.5 ~ 40 Hz, Diagnostic 0.05 ~ 130 Hz |
Sensitivity: | >200 u V P-P |
CMRR: | ≥ 112dB |
Differential Input Impedance: | >5M |
ohm Electrode Offset Potential: | ±300mV |
Polarization Voltage: | ≥ ± 500mV |
Input Impedance: | ≥ 5 M |
Calibration Voltage: | 1mV ± 3% |
ST Segment |
ST Segment Range: | -1.0mV ~ +1.0mV |
Accuracy: | 0.02mV |
Standard accessories | 1.NIBP cuff & tube |
2.ECG cable & electrodes |
3.SpO2 sensor |
4.TEMP probe |
5.Lithium-ion battery |
6.Power cable |
7.Operator's manual |
Optional accessories | 1.Trolley bracket |
2.Hanging bracket |
3.Monitor recorder |
4.Vehicle-mounted power suppl |





