Plastic invisible Laparoscopic Trocar Disposable Endoscopic Trocar

Introduction:

Disposable laparoscopic puncture design and development of the company (hereinafter referred to as the Trocars device) is mainly composed of a Trocars Cannula and Trocars core, Trocars cannula mainly comprises a sealing cover, injection valve and choke valve, sleeve etc.

Product specification

2.5.1 Appearance

The appearance of the Trocars shall be smooth without burrs and sharp edges, as well as voids, cracks, grooves and sinters visible to the naked eye.And no grinding agents, polishing agents and preservatives.

2.5.2 Basic Size

The basic dimensions of the Trocars should comply with the provisions of Figure 1, Figure 2, Figure 3 and Table 2.

2.5.3 Physical Performance

2.5.3.1 Flexibility

The gas injection valve and sealing cover of the Trocars shall be opened and closed flexibly without blocking or jamming.

Main raw materials

Table 1 Material Requirements of Main Parts

Contradiction

1. products are provided by physicians who have received professional knowledge and technical training and are used under the guidance of relevant personnel.

2. do not attempt to operate the product until you have read the instruction manual completely. Any careless operation will pose a risk to the success of the operation

Basic size as well as model and specification comparison table

The basic size of the Trocars shall conform to the provisions in Table 1.

Table 1 Basic Size of Trocars in mm

Cautions

1. Check the package before using. Don't use if the package is damaged.

2. This product is for single patient use only. Do not reuse.

3. Make sure the product is within the expiry date. It is strictly prohibited to use the product beyondthe expiration date.

4. Endoscopic surgery should be performed by surgeons who are familiar with endoscopic techniques.Reference to medical literature relative to technique, complication and other risks is necessary.

FAQ

1. Q:Are you a factory or trading company?
   A: We are a factory, we have rich experience for manufacturing Medical Device more than 10 years.
   2.Q:Where is your factory located? How can i visit there?
   A: Our factory is located in Jiaxing city, Zhejiang Province, China.
   It is about more than 1 hours from Shanghai.
2. 3.Q:Can you make samples?
   A: Yes, we can make samples for you.
   4.Q:How does your factory do as quality control?
   A: Quality is the lift of our factory. We have inspector in different post, and there are three inspectors before packing to get best quality products.
   5.Q: How is your post market service ?
   A: If any damaged rings in the course of carriage, with the checking it's our mistake, we will take full responsibility to compensate the customers.

6.Q:Can you do OEM for us?
A: Certainly. We also can build the moulding for our new customer.

7.Q:Does the price include freight?
A:No, please choose the express service provider or negotiate with us.