Max RCF | 27600×g |
Max Speed | 20000r/min |
Max Capacity | 6×50ML |
Standard rotor | 12×1.5/2.0ML |
Temp control range | -20℃~40℃ |
Noise level | ≤60dB(A) |
Power supply | AC220V 50Hz |
How to operate the high-speed centrifuge correctly
The operation method of the high-speed centrifuge is very important. Only by better understanding the relevant operating knowledge or operating specifications, can we avoid some unnecessary failures such as excessive vibration or abnormal rotation of the motor. During the operation Among them, we must first ensure that the work surface is flat and firm, the work room should be neat and clean, and well ventilated and dry, so as to effectively avoid excessive vibration, and the area must be turned off for testing before use. Then you can turn on the power to see if the power is on or the indicator light is on. In addition, turn off the power, open the lid, wipe the inner tube or rotor clean, put a certain amount of test tube, turn off the centrifuge tube, and then set the timing. Turn on the power switch to adjust the speed.
Regarding the setting of the speed, the requirements of the speed of different separated samples will also be different. We can set the speed according to our own actual needs, and the speed must be adjusted to the minimum position before each shutdown, and then the timer is reset Then turn off the power switch, but also need regular cleaning or maintenance work.