CE Approved Finger Pulse Oximeter OLED Display Cheap Pulse Oximeter
Manufacturer Medical Devices Fingertip Pulse Oximeter
1. Display parameters: blood oxygen SPO2 value, pulse PR value, blood oxygen bar graph, pulse waveform graph, PI (perfusion index), respiratory rate monitoring parameter (130R), sleep monitoring parameter (131R)
2. Display screen: The product adopts blue and yellow OLED screen display, 5 levels of brightness adjustable
3. Display mode: four directions, six display modes
4. Energy saving and environmental protection: The product has low power consumption, and the two AAA batteries can be used continuously for more than 40 hours
5. Voltage warning: when the battery voltage is too low may affect normal use, there is a low voltage warning prompt
6. Automatic shutdown: When no signal is generated, the product will automatically shut down after 8 seconds
7. Advantages: Set blood oxygen probe and processing display module in one, simple product use, low power consumption, small size, light weight, easy to carry
Power | |
Internal | 2*AAA 1.5v alkaline battery |
Power Consumption | Smaller than 30mA(Normal) |
Environmental | |
Operating Temperature | 5°C to 40°C |
Storage Temperature | -20°C to 55°C |
Relative Humidity | 15% to 85% non-condensing |
B: Classification:
1) Anti-electric Shock Type: Internally powered equipment
2) Anti-electric Shock Degree: Type BF equipment
3) EMC: Type B class I
4) Mode of operation: Continuous Operation
Electronics Parameters | |
Parameter | Value |
Hemoglobin saturation Display | 35~100% |
Pulse rate Display | 30~250 BPM |
Resolution | Hemoglobin Saturation: 1% |
Pulse rate: 1 BPM | |
Measurement Accuracy | Hemoglobin Saturation: ±2% (70%~100%), Unspecified (<70%) |
Pulse rate: 2 BPM |