4040-ULP Reverse Osmosis RO Membrane for Industrial RO Water Purifier
The purpose of water treatment is to improve the water quality and make it meet a certain water quality standard. According to different treatment methods, there are many kinds of physical water treatment, chemical water treatment, biological water treatment and so on.
Reverse osmosis membrane is the core element of realizing reverse osmosis water filter, and it is an artificial semi-permeable membrane with certain characteristics made by simulating biological semi-permeable membrane.Ultra Low Pressure Reverse Osmosis Membrane Element could filter the water and salt under very low operation pressure,and get the rate as high as the membrane of normal low pressure.The operation pressure could get 7 bar,half of the normal low pressure membrane.Suitable for desalination from the water which with good quality.
Model Number | Description | BW-4040-ULP |
Performance & Test Condition | The Desalination Rate % | 99.2% |
Water Rate GDP | 2400 | |
The Test pressure | 150psi | |
Test solution Temperature | 25± 1ºC | |
Test Solution Concentration NaCl | 2000ppm | |
Test solution pH value | 6.5-7.5 | |
Recovery Of Single-Branch Membrane Element | 15% | |
Feed water SDI | 5 |
Operating Limit:
Maximum Operating Temperature | 113ºF(45ºC) |
Maximum Working Pressure | 600psi(41.0 bar) |
The high pressure drop | 15psi (1.0bar) |
Continuously operating PH range a | 3-10 |
Short wash PH range (30min) b | 2-12 |
Maximum feed water SDI | SDI 5 |
Tolerance Of Free Chlorine | <0.1ppm |
Maximum pressure drop for single membrane element | 15psi(0.1Mpa) |
FAQ: