Datasheet:AD5063BRMZ
Category | Digital to Analog Converters (DAC) |
Mfr | Analog Devices Inc. |
Series | nanoDAC |
Package | Tube |
Product Status | Active |
Number of Bits | 16 |
Number of D/A Converters | 1 |
Settling Time | 4µs (Typ) |
Output Type | Voltage - Unbuffered |
Differential Output | No |
Data Interface | SPI, DSP |
Reference Type | External |
Voltage - Supply, Analog | 2.7V ~ 5.5V |
Voltage - Supply, Digital | 2.7V ~ 5.5V |
INL/DNL (LSB) | ±0.5, ±0.5 |
Architecture | R-2R |
Operating Temperature | -40°C ~ 85°C |
Package / Case | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) |
Supplier Device Package | 10-MSOP |
Mounting Type | Surface Mount |
Base Product Number | AD5063 |
GENERAL DESCRIPTION
The AD5063, a member of the Analog Device Inc., nanoDAC™ family, is a low power, single 16-bit, unbuffered voltage-output DAC that operates from a single 2.7 V to 5 V supply. The device offers a relative accuracy specification of ±1 LSB, and operation is guaranteed monotonic with a ±1 LSB DNL specification. The AD5063 comes with on-board resistors in a 10-lead MSOP, allowing bipolar signals to be generated with an output amplifier. The device uses a versatile 3-wire serial interface that operates at clock rates up to 30 MHz and that is compatible with standard SPI®, QSPI™, MICROWIRE™, and DSP interface standards. The reference for the AD5063 is supplied from an external VREF pin. A reference buffer is also provided on-chip. The device incorporates a power-on reset circuit that ensures the DAC output powers up to midscale and remains there until a valid write to the device takes place. The device contains a power-down feature that reduces the current consumption of the device to typically 300 nA at 5 V and provides softwareselectable output loads while in power-down mode. The device is put into power-down mode via the serial interface. Total unadjusted error for the device is <1 mV.
FEATURES
Single 16-bit DAC, 1 LSB INL Power-on reset to midscale Guaranteed monotonic by design 3 power-down functions Low power serial interface with Schmitt-triggered inputs 10-lead MSOP, low power Fast settling time of 1 µs maximum (AD5063-1 model) 2.7 V to 5.5 V power supply Low glitch on power-up Unbuffered voltage capable of driving 60 kΩ load SYNC interrupt facility
Data Picture: