1x16W updated LED power supply 300mA output constant current with motion detector
1,Stand-by power <0.5W.
2, Stand-by dimming level is optional, 10%/ 25%.
3, Mounting height up to 5m max..
4, Compact size makes the drivers suitable to fix within most LED ceiling lights.
5, Working mode: Auto switch on/off , or dimming by motion and ambient light level.
6, Integration of microwave motion sensor, daylight sensor and LED power supply technology, save labor cost for installation.
7, Detection area, time delay, daylight threshold, stand-by dimming time and stand-by dimming level can be set via DIP switch.
Specifications
INPUT
| Input voltage | 220-240Vac |
Input frequency | 50-60Hz | |
Input current | 0.11A max | |
Power factor | ≥0.90 | |
Efficiency | ≥84% | |
Stand-by Power | <0.5W | |
OUTPUT
| Output current | 300mA |
Output voltage | 28Vdc – 52Vdc | |
Current accuracy | ±5% | |
Output Power | 15.6W | |
DETECTOR | HF system | 5.8Ghz±75Mhz, ISM wave band |
Transmitting power | <0.5mW | |
Detection range | 4m (@ 3m mounting height) | |
Detection area | 50%/ 100% | |
Hold time | 5s/ 90s/ 3min/ 10min | |
Daylight sensor | 5lux/ 15lux/ 50lux/ Disable | |
Stand-by period | 0s/ 30s/ 10min/ +∞ | |
Stand-by DIM level | 10%/ 25% | |
Mounting height | 6m Max. | |
Motion detection | 0.5~3m/s | |
Detection angle | 150° (Wall installation) 360° (Ceiling installation) | |
ENVIRONMENT
| Working temp.(Ta) | -20~50℃ |
Surface temp.(Tc) | 85℃max | |
Working humidity | 20~85%RH non-condensing | |
Storage temp. | -35~80℃ | |
Life time | ≥30000hours | |
PROTECTION
| Isolation class | ClassⅡ |
Protection class | IP20 |
Mechanical Specification:
Wring Diagram:
Detection Pattern:
Function: