MachineU > China Products > Lights & Lighting > Lighting Accessories > Dimmers
1x10w Push 1-10v Led Dimmer Switch ML10C- PV1For 700mA Output 6-14Vdc
1x10w Push 1-10v Led Dimmer Switch ML10C- PV1For 700mA Output 6-14Vdc
Specifications
Brand Name :
Merrytek
Model Number :
ML10C-PV1
Certification :
SEMKO / CE/ RoHS
Place of Origin :
China
MOQ :
100pcs
Price :
Negotiation
Payment Terms :
T/T, Western Union, PayPal
Supply Ability :
20,000pcs per Month
Delivery Time :
1, Sample and small order: Within 5 working days 2, Bulk order: within 3-4 weeks
Packaging Details :
Packed in bubble bags firstly, and then reinforced with carton for outer packing
Product name :
10w 1-10V & push dimmable led driver
Input voltage :
220-240Vac
Dimming mode :
1-10V,push dim
Output current :
700mA
Output voltage :
3-15Vdc
Dimming range :
2％~100％
Life time :
50,000 hours
IP rating :
IP 20
Working Temperature :
-25℃-50℃
Protection Class :
IP20
Description

1x10w Push 1-10v led dimmer switch ML10C- PV1For 700mA Output 6-14Vdc

Description

1, Adapt the Flicker-free programming,flicker rate less than 2% tested by professional equipment

2, Output constant current 700mA,currency rate ±5%

3, Two circuit design AC-DC-DC, no flicckering in dimming 2%-100%

4, Dimmable LED driver with PUSH DIM, and 1-10V dimming interface.

5, Memory function: The driver has built-in permanent memory against power failure. Lights can return to previous dimming level when switch off and on again, even at mains restores.

6, Synchronization: thanks to the MCU programme, up to 50pcs drivers should be controlled by the same switch. This means there is no need for any additional synchrony wire in larger installations, where many drivers should be controlled by one switch.

7, Maximum length of the cable, from switch to last driver is 20m.

8, Press-in terminals in primary and secondary side, easy assembly.

9, Protection: Short circuit / Over voltage / Over temperature.

10, Long life span 50,000h, 5 years guaranty.

11, It can matches with Merrytek MS01(daylight sessor) and MC003V( microwave motion sensor ) to achieve auto on-off, dimming and daylight funcion

1x10w Push 1-10v Led Dimmer Switch ML10C- PV1For 700mA Output 6-14Vdc


Specifications

INPUT

Input voltage

220-240Vac

Input frequency

50-60Hz

Input current

0.06A max

Power factor

≥0.90

Efficiency(Note1)

≥82%

Stand-by Power (Note2)

≤0.5W

OUTPUT

Output current/voltage

and load

700mA 3-15Vdc 10.5w max

Output load range

1x10.5W max

Current accuracy

±5%

Dimming mode

1-10V, PUSH

ENVIRONMENT

Working temp.(Ta)

-20~50℃

Surface temp.(Tc)

85℃max

Working humidity

20~85%RH non-condensing

Storage temp.

-40~80℃

Life time

≥50000hours

PROTECTION

Isolation class

Class II, SELV

Protection class

IP20

Short circuit

Protection type; auto rest

Over voltage

Protection type; auto rest

Over temperature

Protection type; auto rest

SAFETY&EMC

Safety

EN61347-1 EN61347-2-13 EN60598-1 EN60598-2-6

EMC

EN55015, EN61000-3-2ClassC

EN61000-3-3, EN61547

Approvals

SEMKO, CE, RoHS

Withstand voltage

IN-OUT:3.75KVAC/5mA/1min

OUT-FG:500VAC/5mA/1min

NOTE

Note:

1, Power factor and efficiency is detected at 230Vac input and full load.

2, Standby power is detected at 230Vac input and switch off led load by push button.

Dimming Operation:

1.Push button switch for dimming (see wiring diagram, Fig A)

  • ON/OFF: Short push (120ms ~ 1sec) on the switch
  • Stepless dimming: Long push (＞1sec) on the switch. With every other long push, the light level goes the opposite direction.
  • Synchronization: No need additional synchrony wire in larger installation, up to 15pcs drivers when connected to the same switch.

2. 1-10V dimming (see wiring diagram, Fig B)

The driver supports any active 1-10V dimmer. When the dimming signal is less than 0.8V ~ 1V or short the dimming wires, the output of LED driver could be completely switch off, see Fig B

Wiring Diagram:

Applications:

For downlights in lobby,corridor

Product tags

led power supply dimmer

,

dimmable mr16 led 50w equivalent

,

x10 led dimmer
Send your message to this supplier
Send Now

1x10w Push 1-10v Led Dimmer Switch ML10C- PV1For 700mA Output 6-14Vdc

Ask Latest Price
Product Detail
Brand Name :
Merrytek
Model Number :
ML10C-PV1
Certification :
SEMKO / CE/ RoHS
Place of Origin :
China
MOQ :
100pcs
Price :
Negotiation
Contact Supplier
1x10w Push 1-10v Led Dimmer Switch ML10C- PV1For 700mA Output 6-14Vdc

Shenzhen Merrytek Technology Co., Ltd.

Verified Supplier
10 Years
guangdong, shenzhen
Business Type :
Manufacturer, Exporter, Seller
Main Products :
Microwave Motion Sensor, Dimmable Motion Sensor, Presence Detectors Sensor
Employee Number :
200~300
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products 1-10V Dimmable LED Driver
MachineU China Products Lights & Lighting Lighting Accessories Dimmers
Contact Supplier
Submit Requirement