Flicker-free Sensor Dim LED Driver MLC40C-M Daylight Harvesting
One-stop Solution for Interlligent Office
1. Features
* Combined with microwave occupancy sensor, daylight harvesting sensor and flicker-free dimmable LED driver
* Provided one-stop solution for intelligent LED panel light producer
* Flexible current settings loop-in/loop-out press fit terminal for fast installation
* 5-year warranty
2. Parameters
Input | Operating Voltage | 198-264V AC 50HZ/60 HZ |
Input Voltage | 220-240V AC 50Hz/60 HZ | |
Input Current | 255mA Max. | |
Power Factor | ≥0.9 | |
Efficiency | 88% Max. (over load@230VAC) | |
Stand-by Power | ≤1.0W | |
Wiring Method | Shrapnel press terminal(L,L,N,N), wire cross section:0.75-1.5mm2 | |
Output | Operating type | Constant Current Mode |
Load type | LED | |
Load power | 44W Max. | |
Ripple requirement (Flickering or Flickering Free) | Flicker-free | |
No-load output voltage | <55VDC | |
Load output voltage | 30-42VDC | |
Load output current | 700/750/800/850/900/950/1000/1050mA | |
Constant current/voltage Precision | Constant Current Precision ±5% | |
Wiring Method | Shrapnel press terminal(LED+,LED-,SYNC+,SYNC+,SYNC-,SYNC-), wire cross section:0.75-1.5mm2 | |
Interface Parameter | Minor motion trigger synchronous control interface | SYNC+,SYNC+,SYNC-,SYNC- |
Daylight Harvesting | Daylight Harvesting Function | DH+,DH- (co-operate with MS07 can achieve Daylight harvesting) |
Daylight Harvesting | 250Lux/350Lux/450Lux/550Lux | |
Sensor Parameter | Detection Area | 100% / 50% |
Hold Time | 5S/5min/15min/+∞ | |
Daylight Sensor | 50Lux/150Lux /300Lux /Disable | |
Stand-by Period | 0S/10min/30min/+∞ | |
Stand-by Dim Level | 10%/25% | |
Detection Distance | When the brightness is 100%, the minor motion detection radius is 0.5-2m,after the light is off, the normal motion detection radius is 0.5-3m. | |
Microwave Module Parameter | HF Operating Frequency | 5.8 GHz ±75 MHz,ISM Wave Band |
Transmitting power | 0.5mW Max. | |
Operating Environment | Operating temperature | -25℃~+45℃ |
Storage humidity | 20-90%RH | |
Storage temperature | -40℃~+80℃ | |
Outer case max. temp(Tc) | 85℃ | |
Safety & EMC | Isolation pressurization | Input(L,L,N, N)-Output (SEC+ SEC-) 3000V AC 5mA 60S |
Safety requirement | EN61347-1, EN61347-2-13 | |
EMC | EN55015,EN61000-3-2,EN61000-3-3,EN61547, EN61000-4-2,3,4,5,6, | |
Certification | CE , RoHS | |
Others | IP rating | IP20 |
Protection | Open circuit/short circuit/over load protection | |
Packaging requirement | Indepent installation | |
Case dimension | 110*92*40.5mm | |
Life | 50000h |
5. Function Diagram
6. Sensor Setting
Input current | S1 | S2 | S3 | S4 | S5 |
1050mA | ON | ON | ON | ON | ON- when it is on constant light status (The output current is fixed) |
1000mA | ON | ON | ON | - | |
950mA | - | ON | ON | - | |
900mA | ON | - | ON | - | |
850mA | - | - | ON | - | OFF- when it is on constant light status (Operate under sensing/daylight harvesting mode) |
800mA | - | ON | - | - | |
750mA | ON | - | - | - | |
700mA | - | - | - | - |
Detection Area | S1 |
100% | ON |
50% | - |
Hold Time | S2 | S3 |
5S | ON | ON |
5Min | ON | - |
15Min | - | ON |
+∞ | - | - |
Daylight Sensor | S4 | S5 |
50Lux | ON | ON |
150Lux | ON | - |
300Lux | - | ON |
Disable | - | - |
Stand-by Period | S1 | S2 |
0S | ON | ON |
10Min | ON | - |
30Min | - | ON |
+∞ | - | - |
Stand-by Dim Level | S3 |
10% | ON |
25% | - |
Daylight Harvesting | S4 | S5 |
250Lux | ON | ON |
350Lux | ON | - |
450Lux | - | ON |
550Lux | - | - |