MachineU > China Products > Lights & Lighting > Lighting Accessories > LED Driver
Flicker-free Hot Plug Series 1-10V Dimmable LED Driver ML50C-PVH 50W Max
Flicker-free Hot Plug Series 1-10V Dimmable LED Driver ML50C-PVH 50W Max
Flicker-free Hot Plug Series 1-10V Dimmable LED Driver ML50C-PVH 50W Max
Flicker-free Hot Plug Series 1-10V Dimmable LED Driver ML50C-PVH 50W Max
Flicker-free Hot Plug Series 1-10V Dimmable LED Driver ML50C-PVH 50W Max
Flicker-free Hot Plug Series 1-10V Dimmable LED Driver ML50C-PVH 50W Max
Specifications
Brand Name :
merrytek
Model Number :
ML50C-PVH
Certification :
Semko CE0700 RoHS
Place of Origin :
China
MOQ :
Stop production, not available.
Rated supply voltage :
220-240VAC 50Hz /60Hz
Stand-by Power :
≤0.5W@230V AC （When PUSH is turned off）
Full load output power :
50W Max.
Load output current :
350MA(6-60V) 500MA(6-60V) 550MA(6-60V) 650MA(6-58V) 700MA (6-58V) 750MA (6-56V) 850MA(6-56V) 900MA(6-56V) 1050MA(6-49V)12V (0-1050MA) 24V (0-1050MA)
1-10V（0-10V）dimming :
1-10V dimming（Port current＜1mA), (Max. lead wire length：20m）
Installation dimension :
123*79*23.8mm
Life :
50000h @Ta 100% load
No-load output voltage :
68VDC Max.
Description

Flicker-free Hot Plug Series Dimmable LED Driver ML50C-PVH 50W Max.

  • Flicker-free for whole dimming range
  • Stand-by power below 0.5W
  • Primary & secondary dimming with push button
  • Secondary dimming with 1-10V dimmer and potentiometer
  • Supports LED hot plug
  • Protection: short circuit / over temperature/ over voltage
  • Derating current for over high ambient temperature.
  • Dimming level memory at mains restores
  • Multi-output currents set via dip switches
  • 5 year warranty

1. Parameter

Input Voltage range 198-264VAC 50Hz /60Hz
Rated supply voltage 220-240VAC 50Hz /60Hz
Input Current 0.3A Max.
Power Factor ≥0.90 @230VAC (100% load)
Stand-by Power ≤0.5W@230V AC (When PUSH is turned off)
Efficiency 88%Max. @230V AC(700MA block, 100% load)
Wiring Method Push terminal, wire cross section:0.75-1.5mm2
Output Operating mode Constant current
Load type LED
Ripple requirement (Flickering or Flickering-Free) Flicker value: less than 2% for whole dimming range
No-load output voltage 68VDC Max.
Load output voltage range 6-60VDC
Full load output power 50W Max.
Load output current 350MA(6-60V) 500MA(6-60V) 550MA(6-60V) 650MA(6-58V) 700MA (6-58V) 750MA (6-56V) 850MA(6-56V) 900MA(6-56V) 1050MA(6-49V)12V (0-1050MA) 24V (0-1050MA)
Constant current/voltage
accuracy		 Constant current accuracy ±5%
Wiring method Push terminal, wire cross section:0.75-1.5mm2
Control Method Primary PUSH dimming Primary PUSH dimming and secondary PUSH dimming (Max. lead wire length:20m)
1-10V(0-10V)dimming 1-10V dimming(Port current＜1mA), (Max. lead wire length:20m)
Dimming range Primary PUSH dimming: 1%-100% 1-10V dimming: 1%-100%
Potentiometer Yes, 100kΩ
Exception Protection Requirements Input over voltage protection 300VAC 2 hours
Output over load protection Yes, auto reset
Output no load protection Yes, auto reset
Output over temperature
protection		 Yes, auto reset
Output short circuit
protection		 Yes, auto reset
Output hot plug
protection		 At least 2 series LED lamp (6V), electrothermal hot plug does not damage the LED lamp

Operating

Environment

 Operating temperature/
humidity		 -25℃~50℃, humidity:85% (Non-condensing)
Storage temperature/
humidity		 -40℃~80℃
Max. case temp(Tc) 85℃

Safety

& EMC

 Withstand voltage

3750V AC 5mA 60S (Input “L N”- Output “SEC+ SEC- 1-10V”)

1500V AC 5MA 60S (Input “L N”-“”)

500V AC 5MA 60S (Output “SEC+ SEC- 1-10V”-“Ground”)
EMC standard EN55015 EN61547 EN61000-3-2 EN61000-3-3
Safety standard EN61347-1 EN61347-2-13
Certification Semko CE0700 RoHS
Others Degrees of protection IP20
Type of protection Class I
Installation type Independent installation
Installation dimension 123*79*23.8mm
Memory function Yes
Max. synchronization 15 units
Packaging requirement PE bag + clapboard + outer carton(K=A)
Life 50000h @Ta 100% load

2.Dimension (Unit:mm)

Flicker-free Hot Plug Series 1-10V Dimmable LED Driver ML50C-PVH 50W Max

3.Derating

Flicker-free Hot Plug Series 1-10V Dimmable LED Driver ML50C-PVH 50W Max

4. Wiring Diagram

Flicker-free Hot Plug Series 1-10V Dimmable LED Driver ML50C-PVH 50W Max

Flicker-free Hot Plug Series 1-10V Dimmable LED Driver ML50C-PVH 50W Max

Flicker-free Hot Plug Series 1-10V Dimmable LED Driver ML50C-PVH 50W Max

Product tags

led power supply dimmer

,

50 watt dimmable led driver

,

led dimmer 230v
Send your message to this supplier
Send Now

Flicker-free Hot Plug Series 1-10V Dimmable LED Driver ML50C-PVH 50W Max

Ask Latest Price
Product Detail
Brand Name :
merrytek
Model Number :
ML50C-PVH
Certification :
Semko CE0700 RoHS
Place of Origin :
China
MOQ :
Stop production, not available.
Rated supply voltage :
220-240VAC 50Hz /60Hz
Contact Supplier
Flicker-free Hot Plug Series 1-10V Dimmable LED Driver ML50C-PVH 50W Max
Flicker-free Hot Plug Series 1-10V Dimmable LED Driver ML50C-PVH 50W Max
Flicker-free Hot Plug Series 1-10V Dimmable LED Driver ML50C-PVH 50W Max

Shenzhen Merrytek Technology Co., Ltd.

Verified Supplier
10 Years
guangdong, shenzhen
Business Type :
Manufacturer, Exporter, Seller
Main Products :
Microwave Motion Sensor, Dimmable Motion Sensor, Presence Detectors Sensor
Employee Number :
200~300
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Triac Dimmable LED Driver
MachineU China Products Lights & Lighting Lighting Accessories LED Driver
Contact Supplier
Submit Requirement