Sensor Dim LED Driver 300mA output constant current with daylight priority function MLC16C-P6
Parameters:
Input | Operating Voltage | 198-264V AC 50Hz/60HZ |
Input Voltage | 220-240V AC 50Hz/60HZ | |
Input Current | 130mA Max. | |
Power Factor | 0.9-0.95(100% load) | |
Efficiency | ≥83% Max.@230V | |
Stand-by Power | ≤0.5W | |
Wiring Method | Grey terminal | |
Output | Operating type | Dimming control, daylight priority |
Load type | LED | |
Ripple requirement (Flickering or Flickering Free) | Flickering(But eyes cannot see the shake) | |
No-load output voltage | 60V DC Max | |
Load output voltage range | 28-52V DC | |
Full load output power | 16W Max. | |
Load output current | 300mA | |
Constant current/voltage Precision | Constant Current Precision ±5% | |
Wiring Method | Green terminal | |
Exception Protection Requirements | Output over voltage Protection | Yes |
Output over load protection | Yes | |
Output short circuit protection | Yes | |
Sensor Parameter | HF Operating Frequency | 5.8 GHz ±75 MHz,ISM wave band |
HF Radiated power | 0.5mW Max. | |
Hold Time | 5S/90S/3min/10min (can be set by 2 DIP) | |
Dimming Ratio | 10% -20% | |
Stand-by Period | 0S/30S/10min/+∞ (can be set by 2 DIP) | |
Detection Area | 50%/100% (can be set by 1 DIP) | |
Daylight Sensor | 5lux / 15lux /50lux / 100lux / Disable (can be set by 3 DIP) | |
Daylight priority | 5lux/50lux;15lux/100lux;50lux/150lux;100lux/200lux | |
HF Detection Area | Radius 3-6m (Mounting height 3m) | |
Mounting Height: | Suggested mounting Height:3-4m , 6m Max. | |
Detection Angle | 150°(Wall Mounting), 360°(Ceiling Mounting) | |
Operating Environment | Operating temperature/ humidity | -25℃~50℃ Humidity : 85% (Non-condensing) |
Storage temperature/ humidity | -35℃~80℃ Humidity : 85% (Non-condensing) | |
Outer case max. temp(Tc) | 80℃ | |
Safety & EMC
| Isolation pressurization | (L N)input-output,3000VAC/5mA/1min |
Safety requirement | EN61347-1 | |
EMC | EN55015 | |
Certification | CE | |
Others | IP rating | IP20 |
Protection level | Class II | |
Installation size | Φ78mm | |
Packaging requirement | Bubble bag + clapboard + outer case(K=A) | |
Life | 30000h @ Ta 100% load |
Wring Diagram:
Dimension:
Function Diagram:
Function: