ML30C-PD 1 x 30w DALI & PUSH DIM led driver multi-output current compact design 103 x 67 x 22mm
Description
- Built-in DALI interface and PUSH DIM function,user can choose either DALI dimming or PUSH dimming accroding to their application requirements.
- Multi output current 250mA to 700mA selectable via DIP switch,one driver is applicable for many luminaires,save purchasing cost and inventory qty for customer..
- Compatible with latest DALI interface IEC62386-101,IEC62386-102,IEC62286-207
- Compact size design 103 x 67 x 22mm
- Memory function: The driver has built-in permanent memory against power failure. Lights can return to previous dimming level when switch off and on again, even at mains restores.
- No need additional synchrony wire, up to 15pcs drivers should be controlled by one dimmer.
- Maximum length of the cable, from push button to last driver is 20m
- Press-in terminals in primary and secondary side, easy assembly
- Protection: Short circuit / Over voltage / Over temperature
- 5 years guaranty
Mechanical Specification

Specifications
INPUT | Input voltage | 220-240Vac |
Input frequency | 50-60Hz |
Input current | 0.16A max |
Power factor | ≥0.90 |
Efficiency(Note1) | ≥85% |
Leakage current | <0.5mA/240Vac |
OUTPUT | Output current and load | 250mA 16-60Vdc 15W max, 350mA 16-60Vdc 21W max 400mA 16-60Vdc 24W max, 450mA 16-60Vdc 27W max 500mA 16-58Vdc 29W max, 550mA 16-55Vdc 30W max 600mA 16-50Vdc 30W max, 700mA 16-43Vdc 30W max |
Output load range | 1x30W max |
Current accuracy | ±5% |
Dimming mode | DALI, PUSH |
ENVIRONMENT | Working temp.(Ta) | -20~50℃ |
Surface temp.(Tc) | 85℃max |
Working humidity | 20~90%RH non-condensing |
Storage temp. | -40~80℃ |
Life time | ≥50000hours |
PROTECTION | Isolation class | Class II, SELV |
Protection class | IP20 |
Short circuit | Protection type; auto rest |
Over voltage | Protection type; auto rest |
Over temperature | Protection type; auto rest |
SAFETY&EMC | Safety | EN61347-1 EN61347-2-13 |
EMC | EN55015, EN61000-3-2ClassC |
EN61000-3-3, EN61547 |
DALI interface | IEC62386-101, IEC62386-102, IEC62386-207 |
Approvals | CE |
Withstand voltage | IN-OUT:3.75KVAC/5mA/1min |
NOTE | 1, Efficiency is measured at 550mA/55Vdc output set by DIP switch 2, All parameters not specially mentioned are measured at 230Vac input, rated load and 25℃of ambient temp. |
Output current selection

Wring Diagram
