IP20 Indoor Dali LED Dimming Driver 30 Watt 16 - 58 Vdc Class II
Description:
Specifications
INPUT
| Input voltage | 220-240Vac |
Input frequency | 50-60Hz | |
Input current | 0.16A max | |
Power factor | ≥0.90 | |
Efficiency(Note1) | ≥85% | |
Leakage current | <0.5mA/240Vac | |
OUTPUT
| Output current and load | 250mA 16-60Vdc 15W max, 350mA 16-60Vdc 21W max 400mA 16-60Vdc 24W max, 450mA 16-60Vdc 27W max 500mA 16-58Vdc 29W max, 550mA 16-55Vdc 30W max 600mA 16-50Vdc 30W max, 700mA 16-43Vdc 30W max |
Output load range | 1x30W max | |
Current accuracy | ±5% | |
Dimming mode | DALI, PUSH | |
ENVIRONMENT
| Working temp.(Ta) | -20~50℃ |
Surface temp.(Tc) | 85℃max | |
Working humidity | 20~90%RH non-condensing | |
Storage temp. | -40~80℃ | |
Life time | ≥50000hours | |
PROTECTION
| Isolation class | Class II, SELV |
Protection class | IP20 | |
Short circuit | Protection type; auto rest | |
Over voltage | Protection type; auto rest | |
Over temperature | Protection type; auto rest | |
SAFETY&EMC
| Safety | EN61347-1 EN61347-2-13 |
EMC | EN55015, EN61000-3-2ClassC | |
EN61000-3-3, EN61547 | ||
DALI interface | IEC62386-101, IEC62386-102, IEC62386-207 | |
Approvals | CE | |
Withstand voltage | IN-OUT:3.75KVAC/5mA/1min | |
NOTE | 1, Efficiency is measured at 550mA/55Vdc output set by DIP switch 2, All parameters not specially mentioned are measured at 230Vac input, rated load and 25℃of ambient temp. |
Mechanical Specification:
Dimming Operation:
PUSH Dim
Short push (<0.1sec): Ignore, to avoid reaction on AC spike.
Short push (0.1~1sec): Switch on or off.
Long push (>1sec): Dimming up or down, dimming automatically stops at minimum or maximum value.
Wring Diagram: