ML25C-V Office panel light 0-10v dimmable led driver 600mA output
Description:
1, Two stage AC-DC-DC circuit, without flickering durign dimming.
2, 0-10V and 1-10V dimming mode are available.
3, Output current 600mA. It's also can be customized with other output current.
4, Output voltage 14-42Vdc,load 4-14pcs LEDs.
5, Memory function: The driver has built-in permanent memory against power failure. Lights can return to previous dimming level when switch off and on again, even at mains restores.
6, Factory setting: 100% dimming level.
7, Screw terminals in primary and secondary side, wires can be firmly fixed.
8, Protection: Short circuit / Over voltage / Over temperature.
9, Long life span 50,000h, 5 years guaranty.
10, Size 131.5 x 45 x 22.5mm
Mechanical Specification
Specifications
OUTPUT | Output | 600mA, 14-42Vdc |
Output load range | 25W max | |
Current accuracy | ±5% | |
Dimming mode | 0-10V,1-10V | |
INPUT
| Input voltage | 220-240Vac |
Input frequency | 50-60Hz | |
Input current | 0.13A max | |
Power factor | ≥0.90 | |
Efficiency(Note1) | ≥85% | |
Leakage current | <0.5mA/240Vac | |
ENVIRONMENT
| Working temp.(Ta) | -20~50℃ |
Surface temp.(Tc) | 80℃max | |
Working humidity | 20~90%RH non-condensing | |
Storage temp. | -40~80℃ | |
Life time | ≥50,000hours | |
PROTECTION
| Isolation class | Class II, SELV |
Protection class | IP20 | |
Short circuit | Protection type; auto rest | |
Over voltage | Protection type; auto rest | |
Over temperature | Protection type; auto rest | |
SAFETY&EMC
| Safety | EN61347-1, EN61347-2-13, EN60598-1, EN60598-2-6 |
EMC | EN55015, EN61000-3-2ClassC | |
EN61000-3-3, EN61547 | ||
Approvals | CE | |
Withstand voltage | IN-OUT:3.75KVAC/5mA/1min; IN-FG:1500VAC/5mA/1min | |
OUT-FG:500VAC/5mA/1min | ||
NOTE | 1, Efficiency is measured at 230Vac input and full load. 2, All parameters not specially mentioned are measured at 230Vac input, rated load and 25℃of ambient temp. |
Application
For LED panel light, LED down light, led strip, led tube etc…
Wire diagram