MachineU > China Products > Lights & Lighting > Lighting Accessories > LED Driver

DALI2 Dimmable LED Linear Drivers With Up To 70W With Multiple Output Current From 700mA To 1400mA

Specifications

Brand Name :

KREATPOWER

Model Number :

KL70C-PDiiV1

Certification :

CE, RoHS

Place of Origin :

Shenzhen, China

MOQ :

100pcs

Price :

Negotiable

Payment Terms :

T/T

Supply Ability :

20,000pcs per month

Delivery Time :

1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 4-5 weeks after receiving deposit.

Packaging Details :

Instruction+clapboard+outer carton（K=A）

Operating Voltage :

198-264Vac 50Hz /60Hz

Rated Input Voltage :

220-240Vac 50Hz /60Hz

Stand-by power :

≤0.5W（@230Vac when PUSH or DALI turn off）

Operating mode :

Constant Current

IP rating :

IP20

Installation dimension :

284*30*20.5mm

Working temperature :

-25℃~50℃ Humidity:85% (Non-condensing)

Life :

50000h @Ta full load

Description

LED linear drivers DALI2 dimmable with up to 70W with multiple output current from 700mA to 1400mA

【Product Feature】

Flicker-free for whole dimming range
Stand-by power below 0.5W
Primary dimming with push button
Secondary dimming with 1-10V dimmer and potentiometer
Built-in DALI interface DT6
Supports 10V PWM dimming (3KHz-8KHz)
Protection: short circuit / over temperature/ over voltage
Derating current for over high ambient temperature
Push dim with memory function
5 year warranty

【Parameter】

Input	Operating Voltage	198-264Vac 50Hz /60Hz
	Rated Input Voltage	220-240Vac 50Hz /60Hz
	DC Input Voltage range	200-240Vdc
	Input Current	0.23A Max.
	Input Inrush Current	<15A (Half current pulse width100μs) @230Vac
	Power factor	≥ 0.95 (@230Vac,100% load)
	Total harmonic distortion Typical:(@230Vac, 100% load)	50C-3
	Total harmonic distortion Typical:(@230Vac, 100% load)	13%
	Stand-by power	≤0.5W (@230Vac when PUSH or DALI turn off)
	Efficiency Max(@230Vac,100% load)	87%
	Wiring Method	Push terminal, wire cross section:0.5-1.5mm2
Output	Operating mode	Constant Current
	Load type	LED
	Ripple requirement (Flickering or lickering-Free)	Flicker value: less than 2% for whole dimming range
	Start up time	<1s (@230Vac,)
	No-load output voltage:DC Max.	75V
	Load output voltage range	9-66
	Full load output power	70W
	Load output current	Query dial setting table
	Constant current/voltage Precision	Constant Current Precision ±5%
	Wiring method	Push terminal, wire cross section:0.5-1.5mm2
Control Method	Primary PUSH Dimming	Primary PUSH dimming (Max.lead length:20M)
	1-10V(0-10V)Dimming	1-10V dimming(Port current＜1MA) no turn off function (Max.lead length:20M)
	Dimming Range	Primary PUSH & DALI dimming: 0%-100% 1-10V dimming: 2%-100%
	Primary PWM Dimming	1-10V port PWM dimming (3KHZ-8KHZ)
	Potentiometer	Yes, 100kΩ
	DALI Dimming	DALI dimming (Max.lead length:300M)
Exception Protection Requirements	Output over temperature protection	Yes, without self recovery function(Can be inquired)
Exception Protection Requirements	Output short circuit protection	Yes, without self recovery function(Can be inquired)
Operating Environment	Operating temperature/ humidity	-25℃~50℃ Humidity:85% (Non-condensing)
	Storage temperature/ humidity	-40℃~80℃, Humidity:10%–95%
	Max. case temp(Tc)	85℃
Safety & EMC	EMC standard	EN55015 EN61547 EN61000-3-2 EN61000-3-3
	DALI protocol standard	IEC62386-102, IEC62386-207 DT6
	Safety standard	EN61347-1 EN61347-2-13
	Certification	CE RoHS
	Withstand voltage	3750Vac, 5mA, 60s (Input “L N”- Output “SEC”)
Others	Degrees of protection	IP20
	Type of protection	Class I
	Installation type	Independent installation
	Installation dimension	2843020.5mm
	Blackout memory function	Yes, PUSH blackout memory
	PUSH dimming synchronization	20 units Max.
	Packaging requirement	Instruction+clapboard+outer carton(K=A)
	Weight	225g
	Life	50000h @Ta full load
Note: All parameters are tested at the input voltage of 230Vac and 25 degree environment unless specified.

【Dimension (Unit:mm)】