10m mounting height ON/OFF function long distance pir sensor standalone design
1. Features
1) PIR motion detection
2) Accurate ON/OFF output
3) Daylight sensor detection available
4) Detection area, hold time, and daylight threshold can be set by remote/DIP switch
5) Max detection range: 8-10m in diameter
6) 10m max mounting height
7) Max loading capacity :800w resistive loading and 400w inductive loading
8) Warehouse, workshop, and lobby motion detection is highly recommended
9) Flush mounting and surface mounting available
2. Parameters
Input/Output | Input voltage | 100-240V AC |
Rated voltage | 220V AC | |
Power consumption | 20mA max | |
Output signal | ≤0.2W @220V DC | |
Load Capacity | ON/OFF | |
Power consumption | 800w resistive loading or 400w inductive loading | |
Sensor parameter | Function | PIR motion detection+ daylight sensor |
Detection Area | DIP or remote setting: 100%/75%/50%/25% | |
Hold Time | DIP: 5s/1min/3min/5min/10min/20min/30min | |
Daylight Sensor | DIP: 5Lux/50Lux/150Lux/Disable | |
Radius detection range(based on 100% sensitivity) | 4-5m based on 10m mounting height | |
Remote control | Available | |
Mounting height | typical value:10m | |
Application environment | Drill hole | Φ65-70mm |
Working temperature | 0℃...+35℃ | |
Storage temperature | -40℃~+80℃ | |
Certificate Standard | Certificate | Compliant to CE |
Environmental requirements | Compliant to RoHS | |
IP rating | IP20 | |
“N/A” means not available |
3. Dimension
4. Wiring Diagram
5. Start Process & Initialization
When powered on, the sensor indicator will turn off after flashing for 10S and will not detect a moving signal during this time. After 10S,you can use our MH10 remote or dip switch to adjust detection area, hold time, daylight sensor, etc
6. Factory Settings
Detection Area: 100% Hold Time: 5s Daylight Sensor: Disable
7. Detection radiation
8. DIP Settings
Detection Area
1 | 2 | |
100% | ON | ON |
75% | - | ON |
50% | ON | - |
25% | - | - |
Hold Time
3 | 4 | 5 | 6 | ||
Ⅰ | ON | ON | ON | ON | 5S |
Ⅱ | ON | - | ON | ON | 1min |
Ⅲ | ON | ON | - | ON | 3min |
Ⅳ | ON | ON | ON | - | 5min |
Ⅴ | ON | ON | - | - | 10min |
Ⅵ | - | - | ON | ON | 20min |
Ⅶ | - | - | - | - | 30min |
Daylight Sensor
7 | 8 | ||
Ⅰ | ON | ON | 5Lux |
Ⅱ | - | ON | 50Lux |
III | ON | - | 150Lux |
Ⅳ | - | - | Disable |
**Once the daylight sensor is set as Disable, our motion sensor will detect human movement regardless of the environment lux
10. MH10 Remote Control