DC Motion Sensor with UL/FCC Cerfiticate for North America MC079D RC Z
1. Features
2. Parameter
Input | DC Input Voltage | 12 DC ±1V |
Rated Voltage | 12V DC | |
Stand-by Power | <0.3W | |
Wiring | By Zhaga Book 18 connctor | |
Output | Working Mode | 0-10V DC |
Wiring | By Zhaga Book 18 connector | |
Dim Interface | 0-10V Dimming | < 50mA (Non-constant source) |
Sensor Parameters | Operating Frequency | 5.8 GHz ±75 MHz,ISM Band. |
Transmitting power | 1mW Max. | |
Hold time | 5S/30S/1min/3min/5min/10min/20min/30min | |
Stand-by DIM Level | 10%(1.4-1.6V), 20%(1.9-2.1V), 30%(2.9-3.1V), 50% (4.9-5.1V) | |
Stand-by Period | 0s/10S/1min/3min/5min/10min/30min/+∞ | |
Detection Area | 25%/50%/75%/100% | |
Daylight Sensor | Daylight threshold: 5lux/15Lux/30Lux/50Lux/100lux/150lux/Disable Daylight priority: ON/OFF value (5lux/15Lux/30Lux/50Lux)/150Lux 100Lux/200Lux 150Lux/300Lux | |
Detecting Radius | See detection pattern | |
Mounting Height | 15m Max | |
Detecting Angle | 150°(wall mounting) 360°(ceiling mounting) | |
Operating Environment | Operating Temperature | -35℃…+70℃ |
Storage Temperature | Temperature: -40℃…+80℃; Humidity: 10%-95% (non-condensing) | |
Certificate Standards | Safety standards | EN60669-2-1, EN60669-1 |
EMC standards | EN55015, EN61000-3-2, EN61000-3-3, EN61547 | |
Environmental Requirement | Compliant to RoHS | |
IP Rating | IP65 when mount with Zhaga Block 18 connector | |
Protection Class | Class II | |
Installation | External mounting,integrated mounting | |
Dimension | See dimension | |
Package | White paper box | |
Net Weight | 55g | |
Lifetime | 5 years warranty@Ta 230V full load | |
Note 1. “N/A”means not available. 2. Detection area is effected on volume of motion object and motion speed. The detection area is tested by a 165cm height person and walking speed is 0.3m/s. |
3. Function
1) On/OFF Function (stand-by period be set to “0”s)
2) 2-step dimming function (stand-by period be set to “+∞”)
3) 3-step dimming function (stand-by period be set to “10S/1min/3min/5min/10min/30min”)
4) Daylight priority(stand-by period set to +∞)
4. Dimension (mm)
5.Wiring
*The sensor is designed for connect one load only. Connect more than one loads may damage the sensor.
6.Structure
7. Installation(Match Zhaga Book 18 connector)
8. Radiation Pattern (Typical data)
Ceiling mounting
*Only 100%/75%/50% detection sensitivity is workable when installed at 15m mounting height. 25% sensitivity is not able to detect motion signal.
Wall mounting
9.Remote Control