20W 250-400mA Tuya Bluetooth MESH CC Constant Current Tunable White Smart LED Driver
【Product Feature】
【Parameter】
Micro Series | ML20C-B | ML20CC-B | ML46C-B | ML46CC-B | ||
Input | Operating Voltage | 198-264VAC 50Hz /60Hz | ||||
Rated Input Voltage | 220-240VAC 50Hz /60Hz | |||||
DC Input Voltage range | 200-240VDC | |||||
Input Current | 0.13A Max. | 0.12A Max. | 0.26A Max. | 0.26A Max. | ||
Input Inrush Current (Half current pulse width 100US) @230VAC | <15A | <30A | ||||
Power Factor | ≥0.95 @230VAC (Full load) | |||||
Total harmonic distortion | Typical: 15% (@230Vac, 100% load) | |||||
No-load power | ≤0.5W | |||||
Stand-by Power | ≤0.5W (@230Vac) | |||||
Efficiency(@230VAC Full load) | 84%Max. | 88%Max. | ||||
Wiring Method | Push terminal, wire cross section:0.5-2.5mm2 | |||||
Output | Operating mode | Constant Current | ||||
Load type | LED | |||||
Ripple requirement (Flickering or flickering-Free) | Flicker value: less than 5% for the whole dimming range | |||||
Start up time | <1s (@230Vac) | |||||
No-load output voltage | 60VDC Max. | 65V DC Max. | 70V DC Max. | 70V DC Max. | ||
Load output voltage range | 9-42VDC | 9-50V DC | 9-53VDC | 9-53VDC | ||
Full load output power | 20W Max. | 20W Max. | 46W Max. | 46W Max. | ||
Load output current | 300-700mA | 250-400mA | 600-1050mA | 700-1050mA | ||
Constant current/voltage Precision | Constant Current Precision ±5% | |||||
Wiring method | Push terminal, wire cross section:0.5-1.5mm2 | |||||
Control Method | Working frequency | 5.0/2.4GHz 250Kbps | ||||
Transmitting power | +10dBm (Max.) | |||||
Transmission distance | >20m (Visible distance) | |||||
Exception Protection Requirements | Output over-voltage protection protection | Yes, without self-recovery function (Can be inquired) | ||||
Output short circuit protection | Yes, without self-recovery function (Can be inquired) | |||||
Operating Environment | Operating temperature/ humidity | -25℃~45℃ Humidity:85% (Non-condensing) | ||||
Storage temperature/ humidity | -40℃~80℃, Humidity:10%–95% | |||||
Max. case temp(Tc) | 85℃ | |||||
Safety & EMC | EMC standard | EN55015 EN61547 EN61000-3-2 EN61000-3-3 | ||||
Safety standard | EN61347-1 EN61347-2-13 | |||||
Certification | CE | |||||
Withstand voltage | 3750Vac, 5mA, 60s (Input “L N”- Output “SEC”) | |||||
Others | Degrees of protection | IP20 | ||||
Type of protection | Class II | |||||
Installation type | Independent installation | |||||
Dimension | 160*42*24mm | 180*42*24mm | ||||
Packaging requirement | PE bag+Clapboard+Outer Carton(K=A) | |||||
Weight | 109±5g | 118±5g | 145±5g | 145±5g | ||
Life | 5 year @Ta full load | |||||
Note: All parameters are tested at the input voltage of 230Vac and a 25-degree environment unless specified. |
【Dimension (mm)】
【Wiring Diagram】
Fig.A Single output version
Fig.B Dual output version
【Current gear Setting】
ML20C-B Current gear setting | 1 | 2 | 3 | 4 |
300mA(9-42V) | - | - | - | - |
350mA(9-42V) | - | - | - | ON |
400mA(9-42V) | - | - | ON | - |
450mA(9-42V) | - | - | ON | ON |
500mA(9-40V) | - | ON | ON | - |
550mA(9-36V) | - | ON | ON | ON |
600mA(9-32V) | ON | - | ON | ON |
650mA(9-30V) | ON | ON | ON | - |
700mA(9-28V) | ON | ON | ON | ON |
ML46C-B Current gear setting | 1 | 2 | 3 | 4 |
600mA(9-53V) | - | - | - | - |
650mA(9-53V) | - | - | - | ON |
700mA(9-53V) | - | - | ON | - |
750mA(9-53V) | - | - | ON | ON |
800mA(9-53V) | - | ON | - | ON |
850mA(9-53V) | - | ON | ON | - |
900mA(9-50V) | ON | ON | - | - |
950mA(9-48V) | ON | ON | - | ON |
1000mA(9-46V) | ON | ON | ON | - |
1050mA(9-44V) | ON | ON | ON | ON |
ML20CC-B Current gear setting | Channel 2 | 1 | 2 |
Channel 1 | 3 | 4 | |
250mA(9-50V) | - | - | |
300mA(9-50V) | - | ON | |
350mA(9-50V) | ON | - | |
400mA(9-50V) | ON | ON |
ML46CC-B Current gear setting | Channel 2 | 1 | 2 | 3 |
Channel 1 | 4 | 5 | 6 | |
700mA(9-53V) | - | - | - | |
750mA(9-53V) | - | - | ON | |
800mA(9-53V) | - | ON | - | |
850mA(9-53V) | - | ON | ON | |
900mA(9-50V) | ON | - | - | |
950mA(9-48V) | ON | - | ON | |
1000mA(9-46V) | ON | ON | - | |
1050mA(9-44V) | ON | ON | ON |
【Matters Needing Attention】
1) When the LED lamp is connected to the LED driver, it is not allowed to disconnect and connect the LED lamp and the LED driver, otherwise the LED lamp may be damaged..
2) When using this product, please use it in accordance with the specifications. Failure may occur if it is used beyond the conditions of use of this product.
3) When using this product for networking, the same floor must be equipped with at least one gateway (horizontal transmission communication > 20 meters). If the same gateway is used on different floors, the communication is prone to abnormal situations such as code loss.
4) The Bluetooth module is assembled on the output side cover, which can be adjusted from 0-90 degrees for better communication.