SS304 Round Shape Corrosion Resistant Gas Liquid Wire Mesh Metal Structured Packing

Metal Structured Packing introduce:

The structured packing is a kind of packing which is arranged in uniform geometric pattern and neatly stacked in the tower. Because it has the advantages of large specific surface area, small pressure drop, uniform fluid distribution, high mass and heat transfer rate, it has been applied. The early development is metal structured packing, plastic structured packing, ceramic structured packing and carbon fiber structured packing have been developed.

The structured packing is mainly divided into: mesh corrugated packing, mesh corrugated packing and plate corrugated packing. Main materials :304,304L,316,316L.

Stainless steel wire mesh corrugated packing is characterized by: high theoretical plate number, large flux, low pressure drop, low load function, theoretical tray number increase and the reduction of gas load, no low load, large elasticity of operation, not clear extension effect, and can satisfied the requirement of accurate, large and high vacuum distillation unit. The separation of difficult separation system, thermal sensitive system and distillation of high purity products provides favorable conditions.

Mesh corrugated packing is characterized by: metal mesh corrugated packing is a kind of packaging, is made of metal plate stamping and stretching into a specific specification of wax light mesh, and the general diamond mesh on its surface, and then hit into the corrugated shape. The packing combines the benefits of screen packing and plate wave packing, and has the characteristics of light weight, low pressure and high power.

The characteristics of plate hole packing are: roll hole plate corrugated packaging (also known as perforated plate corrugated packaging), made of 0.1mm~0.12mm metal sheet. Because there are more holes on the surface, the residence time of vapor-liquid in the packing surface is prolonged, the vapor-liquid communication in the tower is more sufficient, and the separation power is improved. The standard of packaging is similar to corrugated packaging. Packing aperture is 0.4-0.5mm. It is generally made of corrosion-resistant stainless steel and is used in the petroleum industry, fine chemicals and medical equipment.

Metal Structured packing characteristics:

1. High number of theoretical plates, high flux and low pressure.

2. The number of theoretical plates increases with the decrease of gas load, and there is no low load extreme.

3. Flexible operation.

4. The extension effect is not obvious.

5. It can satisfy the requirements of high precision, large scale and high vacuum distillation of distillation equipment. Material: stainless steel, brass, phosphor copper, low carbon steel, etc. Use: hard separation system, thermal sensitive system, distillation and separation of high purity products.

Metal Structured Packing Application

1. Sea water deaerators
2. Waste gas purification, drying and gas, water soluble solvents absorbers
3. HCL and H2SO4 production
4. Air separation
5. Strippers
6. Vacuum and atmospheric crude oil fractionator
7. Negative pressure, normal pressure and pressurization operation
8. Liquid/liquid extraction
9. Ethylene water quench tower

Metal Structured packing model:

About Us:

Anping County Hardware Mesh Products Co., Ltd. is located in Anping County, Hebei Province, known as the "Hometown of Chinese Wire Mesh". The company is a dedicated manufacturer of wire mesh demisters. The company has more than 90 sets of knitted mesh equipment. The wire mesh demister is the main product of our company. Most of our employees are operation, maintenance, and installation personnel with practical experience, who can provide customers with the required engineering consultation and installation of tank filtration. solution.Nearly 20 years of experience in the production of mist eliminator mats, knitted wire mesh, and other packaging materials.
We have ISO9001 certification and a strict quality control system in the QC department of the enterprise.
We claim that all mist eliminator pads our customers receive are qualified and perform perfectly. We have different specifications.
The filtration fineness can reach 3μm~5μm. In addition to standard and popular sizes, we can also customize specific applications according to customer needs.
During the company's development, through continuous on-the-spot inspections, personal exchanges and cooperation with customers, and comprehensive discounts and technical support, we have won strong customer support and praise.
The company's performance has maintained an annual output value growth rate of 30-40. Our employees pursue the policy of "enterprising, truth-seeking, rigorous and united", continue to develop and innovate, take technology as the core, and wholeheartedly provide you with cost-effective products, high-quality engineering design, and services.
Welcome customer consultation and I sincerely look forward to cooperating with you!

FAQ:

Q: If I want to know the price, what information should I give you?
A: Material, size, application/purpose, quantity, payment term FOB or CIF, packaging term, etc.

Q: Is the size fixed?
A: No, except for table size. Can be customized according to demand!

Q: Can I negotiate the price?
A: Yes, we will give discounts according to the quantity and type of products you need.

Q: How long is the delivery time?
A: It usually takes 7-10 working days; it depends on the specific quantity and type.