250X 350X Corrosion resistant Ptfe Plastic Structured Packing

Structural packing classification

Main types of high-efficiency structured packing: Orifice corrugated packing is a structured packing assembled with large corrugations on the surface of a metal sheet. It has the characteristics of low resistance, uniform gas-liquid distribution, high efficiency, large flux, and insignificant amplification effect. In negative pressure, normal pressure and pressurized operation. Wire mesh corrugated packing is an important milestone in the development of structured packing. This packing is arranged by corrugated wire mesh sheets. The inclination angle of the corrugated sheets is 30° or 50°. When , the upper and lower two-person trays are staggered and stacked at 90°. It has the advantages of high efficiency, pressure drop and large flux. The products are BX and CY type, which are often used in vacuum distillation, atmospheric distillation and absorption process of difficult to separate and heat-sensitive materials. Punctured corrugated packing is a structured packing formed by rolling a slanted metal sheet to form small punctured holes with high density and then pressing into corrugated sheets. Wire mesh corrugated packing and other properties. Structured packing is a kind of packing that is arranged in a tower according to a uniform geometric figure and is neatly stacked. Due to its advantages of large specific surface area, small pressure drop, uniform fluid distribution, and high mass transfer and heat transfer efficiency, it has been widely used. Metal structured packing was developed earlier, and plastic structured packing, ceramic structured packing and carbon fiber structured packing were developed successively.

Structured packaging has two slants, "X" and "Y". The "Y" type packing, with an inclination of approximately 45º to the horizontal axis, is the most widely used packing. They offer higher filtration efficiency than the "X" type, but at the cost of higher pressure drop/lower capacity. The "X" type packing has an inclination of 60° to the horizontal axis and is suitable for high volume and low pressure drop applications.

About Us

Anping County Hardware Mesh Products Co., Ltd. is located in Anping County, Hebei Province, known as the "Hometown of Chinese Wire Mesh". The company is a dedicated manufacturer of wire mesh demisters. The company has more than 90 sets of knitted mesh equipment. The wire mesh demister is the main product of our company. Most of our employees are operation, maintenance, and installation personnel with practical experience, who can provide customers with the required engineering consultation and installation of tank filtration. solution.Nearly 20 years of experience in the production of mist eliminator mats, knitted wire mesh, and other packaging materials.
We have ISO9001 certification and a strict quality control system in the QC department of the enterprise.
We claim that all mist eliminator pads our customers receive are qualified and perform perfectly. We have different specifications.
The filtration fineness can reach 3μm~5μm. In addition to standard and popular sizes, we can also customize specific applications according to customer needs.

During the company's development, through continuous on-the-spot inspections, personal exchanges and cooperation with customers, and comprehensive discounts and technical support, we have won strong customer support and praise.
The company's performance has maintained an annual output value growth rate of 30-40. Our employees pursue the policy of "enterprising, truth-seeking, rigorous and united", continue to develop and innovate, take technology as the core, and wholeheartedly provide you with cost-effective products, high-quality engineering design, and services.
Welcome customer consultation and I sincerely look forward to cooperating with you!

FAQ

Q: If I want to know the price, what information should I give you?
A: Material, size, application/purpose, quantity, payment term FOB or CIF, packaging term, etc.

Q: Is the size fixed?
A: No, except for table size. Can be customized according to demand!

Q: Can I negotiate the price?
A: Yes, we will give discounts according to the quantity and type of products you need.

Q: How long is the delivery time?
A: It usually takes 7-10 working days; it depends on the specific quantity and type.