0.2mm Wire Diameter 300mm Diameter Stainless Steel Titanium Wire Mesh Demister

Wire Mesh Demister Information

Wire Mesh Demister is used to separate the droplets entrained by the gas in the tower to ensure mass transfer efficiency, reduce the loss of valuable materials and improve the operation of the compressor after the tower. Generally, a wire mesh demister is installed at the top of the tower. It can effectively remove 3--5um droplets. If a demister is installed between the trays, it can not only ensure the mass transfer efficiency of the trays but also reduce the plate spacing. Therefore, the wire mesh demister is mainly used for gas-liquid separation. It can also be used as an air filter for gas separation. In addition, the wire mesh can also be used as a buffer for various instruments in the instrument industry, an electronic shield to prevent radio wave interference, etc. It has been widely used in the industrial production of chemicals, petroleum, sulfuric acid, medicine, light industry, metallurgy, machinery, and environmental protection.

Wire Mesh Demister Specification

Working Principle Of Wire Mesh Demister

When the gas with mist rises through the wire mesh at a certain speed, due to the inertia of the rising mist, the mist collides with the filaments of the wire mesh and is attached to the surface of the filaments. The diffusion of the mist on the surface of the filament and the gravitational sedimentation of the mist makes the mist form larger droplets and flow along the filament to the junction of the two filaments. The wettability of the filament, the surface tension of the liquid, and the capillary action of the filament make the droplet larger and larger until the aggregated droplet is so large that its own gravity exceeds the resultant force of the upward force of the gas and the surface tension of the liquid When the droplet falls off the filament. After the gas passes through the wire mesh demister, there is basically no mist. Separation of mist in gas to improve operating conditions, optimize process indicators, reduce equipment corrosion, extend equipment service life, increase processing capacity and recover valuable materials, protect the environment, reduce air pollution, etc. Simple structure, small volume, high defoaming efficiency, low resistance, lightweight, convenient installation, operation, and maintenance. The pressure drop of the gas passing through the demister is very small, only 250-500Pa, which is beneficial to improve the production efficiency of the equipment

Wire Mesh Demister Application

The wire mesh demister (demister) is used to separate the droplets entrained by the gas in the tower to ensure mass transfer efficiency, reduce the loss of valuable materials and improve the operation of the compressor after the tower. Generally, wires are installed at the top of the tower. Net demister. It can effectively remove 3--5um droplets. If a demister is installed between the trays, it can not only ensure the mass transfer efficiency of the trays but also reduce the plate spacing. Therefore, the wire mesh demister is mainly used for gas-liquid separation. It can also be used as an air filter for gas separation. In addition, the wire mesh can also be used as a buffer for various instruments in the instrument industry, an electronic shield to prevent radio wave interference, etc. It has been widely used in the industrial production of chemicals, petroleum, sulfuric acid, medicine, light industry, metallurgy, machinery, and environmental protection.

Company Profile

Anping County Hardware Mesh Products Co., Ltd. is located in Anping County, Hebei Province, known as the "Hometown of Chinese Wire Mesh". The company is a dedicated manufacturer of wire mesh demisters. The company has more than 90 sets of knitted mesh equipment. The wire mesh demister is the main product of our company. Most of our employees are operation, maintenance, and installation personnel with practical experience, who can provide customers with the required engineering consultation and installation of tank filtration. solution.Nearly 20 years of experience producing mist eliminator mats, knitted wire mesh, and other packaging materials.

We have ISO9001 certification and a strict quality control system in the QC department of the enterprise.

We claim that all mist eliminator pads our customers receive are qualified and perform flawlessly. We have different specifications.

The filtration fineness can reach 3μm~5μm. In addition to standard and popular sizes, we can also customize specific applications according to customer needs.

Through continuous on-the-spot inspections, personal exchanges and cooperation with customers, and comprehensive discounts and technical support, we have won strong customer support and praise during the company's development.

The company's performance has maintained an annual output value growth rate of 30-40. Our employees pursue the policy of "enterprising, truth-seeking, rigorous and united", continue to develop and innovate, take technology as the core, and wholeheartedly provide you with cost-effective products, high-quality engineering design, and services.

Welcome customer consultation and I sincerely look forward to cooperating with you!