316L York 431 High Efficiency Mesh Pad Demister

Mesh Pad Demister Introduction

The wire mesh demister is mainly composed of a wire mesh and a wire mesh grille to form a wire mesh block and a supporting device for fixing the wire mesh block. The wire mesh is a gas-liquid filter of various materials, and the gas-liquid filter is made of metal wire or Non-metallic wire composition. The non-metallic wire of the gas-liquid filter is made by twisting multiple strands of non-metallic fibers, or it can also be a single strand of non-metallic wire. The wire mesh demister can not only filter out the larger liquid foam suspended in the air flow, but also filter out the small and micro liquid foam. It is widely used in gas-liquid in chemical, petroleum, tower manufacturing, pressure vessel and other industries in the separation device.

Mesh Pad Demister Use

The wire mesh demister (demister) is used to separate the droplets entrained by the gas in the tower to ensure mass transfer efficiency, reduce the loss of valuable materials and improve the operation of the compressor after the tower. Generally, wires are installed at the top of the tower. Net demister. It can effectively remove 3--5um droplets. If a demister is installed between the trays, it can not only ensure the mass transfer efficiency of the trays, but also reduce the plate spacing. Therefore, the wire mesh demister is mainly used for gas-liquid separation. It can also be used as an air filter for gas separation. In addition, the wire mesh can also be used as a buffer for various instruments in the instrument industry, an electronic shield to prevent radio wave interference, etc. It has been widely used in industrial production of chemical, petroleum, sulfuric acid, medicine, light industry, metallurgy, machinery and environmental protection.

Mesh Pad Demister Material

Mesh Pad Demister Working Principle

When the gas with mist rises through the wire mesh at a certain speed, due to the inertia of the rising mist, the mist collides with the filaments of the wire mesh and is attached to the surface of the filaments. The diffusion of the mist on the surface of the filament and the gravitational sedimentation of the mist make the mist form larger droplets and flow along the filament to the junction of the two filaments. The wettability of the filament, the surface tension of the liquid and the capillary action of the filament make the droplet larger and larger until the aggregated droplet is so large that its own gravity exceeds the resultant force of the upward force of the gas and the surface tension of the liquid When the droplet falls off the filament. After the gas passes through the wire mesh demister, there is basically no mist. Separation of mist in gas to improve operating conditions, optimize process indicators, reduce equipment corrosion, extend equipment service life, increase processing capacity and recover valuable materials, protect the environment, reduce air pollution, etc. The structure is simple, the volume is small, the foam removal efficiency is high, the resistance is small, the weight is light, and the installation, operation and maintenance are convenient. The pressure drop of the gas passing through the demister is very small, only 250-500Pa, which is beneficial to improve the production efficiency of the equipment.

About Us

Anping County Hardware Mesh Products Co., Ltd. is located in Anping County, Hebei Province, known as the "Hometown of Chinese Wire Mesh". The company is a dedicated manufacturer of wire mesh demisters. The company has more than 90 sets of knitted mesh equipment.The wire mesh demister is the main product of our company. Most of our employees are operation, maintenance, and installation personnel with practical experience, who can provide customers with the required engineering consultation and installation of tank filtration. solution.Nearly 20 years of experience in the production of mist eliminator mats, knitted wire mesh, and other packaging materials.
We have ISO9001 certification and a strict quality control system in the QC department of the enterprise.
We claim that all mist eliminator pads our customers receive are qualified and perform perfectly. We have different specifications.
The filtration fineness can reach 3μm~5μm. In addition to standard and popular sizes, we can also customize specific applications according to customer needs.
During the company's development, through continuous on-the-spot inspections, personal exchanges and cooperation with customers, and comprehensive discounts and technical support, we have won strong customer support and praise.
The company's performance has maintained an annual output value growth rate of 30-40. Our employees pursue the policy of "enterprising, truth-seeking, rigorous and united", continue to develop and innovate, take technology as the core, and wholeheartedly provide you with cost-effective products, high-quality engineering design, and services.
Welcome customer consultation and I sincerely look forward to cooperating with you!