Fiber Bed Mist Eliminators Processes Generate Finer Droplets

Description of Fiber bed mist eliminator

Fiber mesh demisters (demisters) consist of a compressed fiber mat filled between two concentric screens or parallel flat screens. Depending on design parameters, these mist eliminators can collect up to 99.95% or more of sub-micron liquid particles. Fiber demisters are individually designed and manufactured for the customer, with housings made of various alloys, thermoformed plastics or fiberglass reinforced plastics. The materials used for the compressed fiber bed are special glass wool, ceramics, polypropylene, PTFE or polyester fibers. Mist eliminators of this type have proven to be very suitable for sulfuric acid plants, nitric acid plants and thermal phosphoric acid plants, chlorine and other chemical plants, pulp plants, textile plants, asphalt saturation towers, food processing, chroming processes, turbine lube oil tank exhaust Tube and plastic molding. Applications containing fluoride, high pH or steam can use special carbon fibers.

Low-Velocity Fiber-Bed Mist Eliminators ME FGM type

Low-velocity mist eliminators are optimally equipped with a mix of glass fiber and a specific proportion of coarse and fine fibers. Coarse resistant fibers ensure uniform distribution of finer ones, increase the velocity of liquid discharge out of layer, giving the latter the mechanical strength and stability, and ensuring the operation of finer fibers throughout the layer. Usually the layers made of fibers 5-20 mcm in diameter and 88-92 % porosity are used . More often, the fibers 8 to 15 mcm in diameter with 50-60 mm layer thickness are used.

The basic material we use in filtering part is a special chemically-stable fiber glass FGM 145 in the form of multilayer needle-punched fabric resistant to concentrated and diluted acids. Besides, synthetic fibers of other types may be used depending on operating environment.

Hydraulic resistance: not more than 150 mm of water column.

Efficiency of mist eliminator of this type may be decreased in case the operating gas flow contains insoluble organic, metallic or mineral particles which may penetrate into the mist eliminator from the units installed before it. These may also be sulfate particles or chemically generated salts such as ammonium sulfate, ammonium nitrate, nitrosilic-sulfuric anhydride, nitrosilic pyrosulfite, etc.;

Company Profile

Anping County Hardware Mesh Products Co., Ltd. is located in Anping County, Hebei Province, known as the "Hometown of Chinese Wire Mesh". The company is a dedicated manufacturer of wire mesh demisters. The company has more than 90 sets of knitted mesh equipment.The wire mesh demister is the main product of our company. Most of our employees are operation, maintenance, and installation personnel with practical experience, who can provide customers with the required engineering consultation and installation of tank filtration. solution.Nearly 20 years of experience in the production of mist eliminator mats, knitted wire mesh, and other packaging materials.
We have ISO9001 certification and a strict quality control system in the QC department of the enterprise.
We claim that all mist eliminator pads our customers receive are qualified and perform perfectly. We have different specifications.
The filtration fineness can reach 3μm~5μm. In addition to standard and popular sizes, we can also customize specific applications according to customer needs.
During the company's development, through continuous on-the-spot inspections, personal exchanges and cooperation with customers, and comprehensive discounts and technical support, we have won strong customer support and praise.
The company's performance has maintained an annual output value growth rate of 30-40. Our employees pursue the policy of "enterprising, truth-seeking, rigorous and united", continue to develop and innovate, take technology as the core, and wholeheartedly provide you with cost-effective products, high-quality engineering design, and services.