Wire Mesh Vapor Liquid Separator Mist Eliminator Parts Austenitic 316Ti

316Ti is a kind of austenitic stainless steel, titanium is added to ss316 to improve the inter-granular corrosion resistance.

Other material of construction

Mesh and grids may be made from most metals and plastics i.e. SS304, 304L, 316, 316L, 321, 310S, 201, Duplex 2205, 904L, Alloy 20, Monel, Nickel, Copper, P.T.F.E., H.D.P.E., P.P., co-knit of 316L + PTFE, alloy 20 + PTFE, 304+PTFE, 904L + PTFE, 304+glass fiber, 316L + glass fiber, 904L + glass fiber, 316L+PP etc. and other metals, alloys or plastic which can be drawn or extruded.

Vapor liquid separator, Types & applications:

Wire mesh mist eliminator vapor liquid separator of various styles and materials are available for all applications. By selecting the style based on the application, the wire demister fully demonstrates its performance matching the work conditions.

This type is for simple process or a process where the existence of products becomes problematic. Examples for when this is used are highly viscous liquid or liquid filled with solid particles, gas containing small dust, very large water drops (10 microns or larger) or large amounts of highly humid liquid.

Compared to other types, this wire demister provides higher gas speed than the average at a low cost, although efficiency is reduced to some extent. Normally, 150mm thick mesh pad is used.

This demister is most appropriate for general purposes. When data such as the amount of flying and accompanying liquid and the size of water drops are clear, the effect is excellent. The demister is highly efficient even when, to a certain extent, the air flow is changed. A 100mm thick demister is used for distillation tower, evaporator and scrapper but the thickness can be increased to 150mm for higher efficiency.

Though the demister is deemed the standard type because it is used in many fields, this model is strong and highly efficient. The demister is used in places where it is necessary to reduce accompanying airborne droplets to a minimum.

The demister safely functions because the design adapts to changes in gas or fluid flow rate. Generally, the 100mm mesh pad is used, but the mesh pad of greater thickness is used where the flow rate changes extensively, offering increased production.

It is appropriate for collecting very fine particles (1-3 micron) and effective for evaporator, washing equipment, compressor and absorption column, etc. Normally, 200mm to 300mm thickness mesh pad is used.

Hualai’s Advantages in mesh pad demister:

Optimized solutions

Standard configurations

Tailored made configurations

Expedited services available

knowledge and engineering experience

High quality manufacturing standards and procedures

Manufactured in a variety of corrosion resistant materials (Metals, Plastics and Co-knit mesh options)

Package & shipping of demister mist eliminator:



Welcome your inquiry with any questions! Here in Hualai we are always ready to be helpful!