Mesh Length 3m Aperture 100*100mm Construction Wire Mesh Making Machine

Introduction of Construction Wire Mesh Making Machine:

1. Vertical wires are fed from wire coils automatically and through straightening rollers. Cross wire should be pre-cut and fed by a cross wire hopper automatically.

2. Servo motor and planetary reducer for pulling mesh, more precise.

3. The construction wire mesh making machine is equipped with cutting machine to make panel mesh.

Features of Construction Wire Mesh Making Machine:

1. The operation of the equipment is simple: there is only one automatic operation button to switch the machine on and off.

2. Motor servo control: Equipped with Delta VE frequency converter and PG card, so that the main motor 0-1500r/min acceleration and deceleration time is 0.02s, zero speed can be 200% torque operation, maximize the rapid reaction ability of the equipment. (Autonics encoder for motor)

3. Helical gear reducer: For the high load operation of the best equipment, the K series helical gear reducer with large torque bearing capacity is used, and the external installation makes it easy to maintain.

4. Mesh drawing system: Equipped with Panasonic servo motor and planetary reducer, the stability of the system, as well as the standard size of the product.

5. Cross wire system: Equipped with Panasonic servo motor + planetary reducer, the weft wire length is consistent and the system is stable.

6. Fault display: When the device fails, it will be displayed on the touch screen (HMI), which facilitates the maintenance of the device.

7. Device parameters: All device parameters can be set on the touch screen.

8. The welding transformer is controlled by a separate microcomputer, once pressurized, multiple welding, so that the welding is more reliable, more stable,

9. The welding power of this equipment is electric, and the stepper motor hopper is adopted. The brake motor drives the car to let off, and the stepper motor drives the car to pull the net. Warp wire and weft wire are cut off by straightening machine, vertical wire is placed manually, and horizontal wire is automatically dropped.

10. Welding electrode head made of high quality chromium zirconium copper material, long service life, reduce production costs.

11. The use of the latest CNC welding, can meet the requirements of high-speed continuous welding 3.2mm -- 6.3mm steel wire, and no welding, leakage phenomenon.

12. The whole operation only needs 2-3 people, which greatly reduces the labor cost.

Technical Parameters of Construction Wire Mesh Making Machine:

Applications of Construction Wire Mesh Making Machine:

The construction wire mesh is used for coal mine roof protection, tunnel, bridge construction, roadbed mesh, construction site construction materials.

Photos of Construction Wire Mesh Making Machine: