Hole Size 1/2 Inch Chicken Cage Mesh Electric Welded Wire Mesh Machine

Introduction of Electric Welded Wire Mesh Machine:

1. Both of the line wire and cross wire are fed from wire coils automatically.

2. The Two side cutters can be adjusted to make mesh rolls at same time.

3. The welding time and welding current can be adjusted on the control panel to adjust the welding degree.

4. The welding transformers have 8 degrees and can be adjusted for different wire diameters.

For example, need to adjust voltage regulation to level six, inserted the handle as shown below:

5. The mesh roll length can be set by counter switch on the control panel. (For example, if 25m mesh length, 6mm cross wire space, the number should set 5001.)

6. About electric parts

New type machine use Delixi brand breaker, Schneider brand electric parts.

Old type machine use common brand electric parts, no inverter.

7. About the steel plate&bottom material

On the back of the new type machine, we use 1.5mm steel plate, on the bottom we use square steel; Old type machine use 0.2mm steel plate and angle iron, not stable.

8. About the motor and reducer

New type machine use Mengniu brand main motor & Guomao brand reducer, which are the best quality in China. The quality can be guaranteed.

Technical Parameters of Electric Welded Wire Mesh Machine:

Applications of Electric Welded Wire Mesh Machine:

Electric welding mesh is made of high quality low carbon steel wire row welding, and then cold plating (electroplating), hot plating, PVC plastic coated surface passivation, plasticization treatment, flat mesh, uniform mesh, solid solder joints, local machining performance is good, stable, anti-corrosion, good corrosion resistance.

The use of electric welding mesh is very wide, mainly used in the following areas:

Building and civil engineering. Electric welding mesh is often used in the reinforcement of building structures, such as wall insulation anti-crack engineering, internal plaster hanging mesh, building external wall insulation system.
The breeding industry. Welding nets can be used as fences, such as cattle and sheep fences, pig nets, etc.
Agriculture. Electric welding mesh can be used for farm fences, corn granaries to store corn ears, seedbeds, etc.
Industry. Electric welding mesh is used for welding metal parts in machinery manufacturing, such as construction machinery, automobiles, ships, aircraft, etc.
Gardening and decorating. Electric welding mesh can be used to make flower POTS and flower stands, garden fences and so on.
Filtration and drainage. Electric welding mesh can be used to make screens and filtration equipment.
Security protection. Electric welding mesh can be used to make protective equipment and safety nets.
In addition, welding mesh can also be used for highway guardrail, sports site Seine, landscaping (such as retaining walls, urban landscape and park landscape, etc.), seismic or soil desertification reinforcement, slope protection, river control, coastal protection, reservoir, canal and pipeline renovation, rock rupture protection, bridge protection, etc.

Photos of Electric Welded Wire Mesh Machine: