Servo Motor Pull Mesh CNC Welded Wire Fence Mesh Panel Welding Machine

Welded Wire Fence Mesh Panel Welding Machine Introduction:

1. Control System
The control system adopts synchronous control technique. The welding time and separate welding are controlled by computer with PLC program touch screen system and HMI.

2. Mesh Pulling Part
The mesh pulling system controlled by servo-motor adopts elastic tension and opening positioning mesh, which improves the precision of mesh opening size.

3. Line wire sending part
The mesh sending system is controlled by computer. It simplifies the process that every tensile spring has to be changed when the wire diameter is different. You only need to change the pressure of welding point. Welding aperture can adjust randomly within range.

4. Wire Feed Way
The line wires and cross wires should be pre-straightened and pre-cut.
The line wire is feeding by the servo motor, pulling the mesh the servo motor auto. The cross wires are fed automatically from the multi hopper which capacity is more over ten times than the traditional hopper.

Welded Wire Fence Mesh Panel Welding Machine Features:

1. The PLC adopt Panasonic Jpan

2. The touch screen adopt Wenview China

3. The low-voltage apparatus adopt Schneider France

4. The air switch adopt Schneider France.

5. The power supply adopt Omron Japan

6. The frequency converter adopt Delta China.

7. The servo motor adopt Panasonic Japan.

Welded Wire Fence Mesh Panel Welding Machine Technical Parameters:

Welded Wire Fence Mesh Panel Welding Machine Applications:

It is widely used in industry and construction, such as building board, the roof, the wall, the bridge, concrete road, the floor, the airport, cement pipe, concrete prefabricated components, retaining wall, protection slope, the tunnel, the dock, the dyke, construction reinforcing mesh; highway; railway; bridge; enclosure mesh; fencing and so on.

Welded Wire Fence Mesh Panel Welding Machine Photos: