Rolling Shutter Slat Roll Forming Machine Shanghai can produce rolling shutter door with good quantity

Introduction of Rolling Shutter Slat Roll Forming Machine Shanghai. The line consists of decoiler, sheet guiding equipment, roll forming section, cutter, supporter, hydraulic system, control system. The roller shutter, which made by this Rolling Shutter Slat Roll Forming Machine Shanghai have neat external appearance, even ripples, high utilization and strong strength.

Rolling Shutter Slat Roll Forming Machine Shanghai Equipment
Main technical parameter:
Material of Roll Shutter Forming Machine: Galvanized steel sheet
Thickness of raw material: 0.6--1.0mm
Width of raw material: 198mm
Effective width of Rolling Shutter Slat Roll Forming Machine Shanghai: 118mm
Main motor power of Roll Shutter Forming Machine: 4kw
Hydraulic motor power: 2.2kw
Roller stand: 15 groups
Material of cutter: Cr12
Working speed of Rolling Shutter Slat Roll Forming Machine Shanghai: 10-12m. Min
Total weight of Roll Shutter Forming Machine: About 4MT
Voltage: 380V 3 phase 60 Hz or as per the customers' requirements
Control system: PLC control

Rolling Shutter Slat Roll Forming Machine Shanghai, Roller shutter doors roll forming machine, shutter door forming machine, Roller shutter door forming machine
Machine's components
Uncoiler and its base.
Guiding equipment.
Roll forming system.
Hydraulic system.
Cutting system.
PLC control system.
Support table.

Main technical parameters for Rolling Shutter Slat Roll Forming Machine Shanghai
Material: 0.5-07mm color steel or galvanized steel sheet;
Uncoiler's loading capacity: Max. Capacity: 5000Kgs. (can be increased to be 10 tons)
Motor power: 4Kw(depend on final design);
Control system: Mitsubishi PLC&converter.
Cutter material: Cr12 mould steel. Roll Shutter Door Machine.