Round Hole Decorative Aluminum Sheet Panels/Aluminum Perforated Metal Sheet

Decorative Aluminum Sheet Panels purpose

For through the urban area of highway, railway, subway and other traffic environmental noise barrier of municipal facilities, building walls, generator room, factory workshop, and other noise source acoustic noise reduction with sound-absorbing board, ceiling, wall panel can be used for building the sound-absorbing material, can be used for building stair, balcony, environmental protection furniture decoration orifice, shield can be used for mechanical equipment.

1. Coil thickness 0.2mm-1mm, length 20m.

2. Aperture of 1.5mm to 10mm.

3. Thickness of the sheet is 0.2mm-20mm; Width * length ≤1.5m*5m.

4. Aperture of 0.5mm to 200mm.

Decorative Aluminum Sheet Panels

Aluminum curtain wall plate because of its good processing performance is good, and color appearance and changeful modelling, it is not easy contamination, easy cleaning and maintenance, etc, not only can be used in the outdoor decoration can also be applied to indoor metope, smallpox ceiling, partition wall, present building, building, the balcony, door cover, window table, counter, billboards, even the adornment such as screen, and arts and crafts. The thickness of the board is 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm and other specifications. The large size of the molded aluminum single board can reach 1500x4000mm.

The structure of aluminum hanging plate single layer aluminum curtain wallboard is mainly composed of panels, reinforcing bars, hanging ears and other components. The structures of the processed fluorocarbon coated plate 01 are successively from top to bottom: protective film layer, fluorocarbon resin PVDF system (varnish, finish, primer), pretreatment layer, aluminum plate layer, pretreatment layer, and back coating (double-sided spraying). According to the requirements of customers, mineral wool and rock wool can be added on the back of the aluminum plate to enhance insulation, heat insulation and sound insulation.

Aluminum honeycomb panel, in the past only limited to the field of aviation, in recent years, with the development of the economy, its use gradually developed to the civil field, such as building decoration exterior wall, conference room, vehicle, ship decoration wallboard, compartment, etc. Aluminum honeycomb panel is made of all aluminum materials. The panel, bottom plate and honeycomb core are all made of high-strength aluminum alloy. It is a green environmental protection product and easy to be recycled and reused.

Recommended Usage:

1. Building lobby

2. Waiting room/bus terminal

3. Important public facilities

Stadiums and gymnasiums

Office of 5.

6. The conference room

7. The outer wall of the building

Packing: Wooden case

Length: Can also be customized according to the drawings you provide, according to customer requirements

Type: Rhombic

Process: material (zinc, aluminum alloy) - cut into the required size, covering membrane (the advantage of the cladding is to avoid the scratch during the process of handling operation of 0) - in the numerical control machine tools, hydraulic CNC punching aperture pass - bending forming (after 3 times of bending) - after bending, tore off the cover on the membrane, to deal with the oil (to oil processing method is: pickling, play sand)

Surface treatment: anodized matte plastic fluorocarbon spraying (high cost) or (outdoor polyester powder spraying)

Fire prevention: no combustion-supporting, can be used in high temperature environment