Motor Recycling Machine Scrap Electric Motor Stator Separator Machine

The motor stator is composed of a machine frame, a cylindrical iron core arranged in the machine frame and a copper wire winding in the three parts of the iron core. The motor stator is a special equipment for dismantling broken disassemble the motor stator, the hydraulic system equipment, equipment can be the stator (limited to
cast-iron), cylindrical core broken into two, copper wire winding from the cylindrical iron core is pulled out, complete the dismantling process of motor stator. The utility model has the advantages of stable and reliable device operation, high work efficiency, convenient operation, flexibility, and zero pollution to the environment, and is an
ideal device for breaking and disassembling the motor stator.

Application of waste motor stator separator:

Automatic Motor Recycling Machine is used for motor/stator cutting and stripping copper from iron/aluminum cover, this is a kind of waste motor/stator recycling equipment. This machine cut the stator/motor in half firstly, then take all the inside copper out finally that all steps within 2 times. It's very cost-effective and convenient in using.

Working principle of stator separating machine:

motor stator broken by hydraulic system disassemble, moving with a master cylinder, through the replacement of different tooling, respectively (limited to the motor stator frame and stator iron frame) cylindrical iron core is broken into two halves, in another position can be a cylindrical stator winding copper iron core in the iron pulled out. The motor stator, silicon steel sheet, copper wire from the three part to complete the dismantling process of motor stator.

Specification of stator recycling machine:

FAQ
Q1: Is there anything we should take care before processing?
A1: Please clear up iron from the mixed cables, get the granulator started, infeed according to the granulator’s capacity.

Q2: If there’s plastic in copper granules,how should I do?
A2: Please adjust the wind power of the vibrator, bottom wind power, adjust vibration frequency.


Q3: If copper granules output quantity is becoming Less,what’s the problem?
A3: Please inspect the vibrator, please brush off the copper granules in the vibrator’s screen.

Q4: Which kinds of cables can I processing with this machine?
A4: Auto-wire, communicate cable, and other mixed copper wire/cable, phone wires and so on.

Q5: Is there has pollution in recycling?
A5: This is dry separating, not pollution and other waste at all.

Q6: Is there any other kinds cable granulator? I want bigger output.
A6: Yes, sure, we also have other model BS-800 with bigger output, and BS-1000, the output can up to 1t to 2t.