Large Output Low Noise Automatic Operating Motor Stator Separator

TF-008 motor recycling equipment is a heavy duty with large torque recycling machine.mainly used in waste scrap copper motor stator recycling.it can taking out all the copper windding .liberate your labor force.

Working process of motor separator machine:
Mainly have 2 area: cutting and separating complete the whole process.Firstly the cutting parts cut the motor shell by flat blade then the sharp blade cutting the motor stator into 2pcs.Secondly taking out all the copper winding in twice by putting area.

Advantages of motor recycling machine:
1. This stator separator is targeted with high efficiency, after cut the stator in half, it can take out all the copper winding within 2 times, which is high economic efficiency.
2. Nice appearance with reasonable structure.
3. Using heavy cylinder, large torque, can withstand high loads.
4. We use international famous brand for hydraulic solenoid valve with durable long life.
5. The material of fixture is alloy steel with durable long life.
6. The processing of equipment is without metal loss, with improved recycling value, and environmental friendly.

Specification of stator recycling machine:

FAQ
Q1: Is there anything we should take care before processing?
A1: Please clear up iron from the mixed cables, get the granulator started, infeed according to the granulator’s capacity.

Q2: If there’s plastic in copper granules,how should I do?
A2: Please adjust the wind power of the vibrator, bottom wind power, adjust vibration frequency.


Q3: If copper granules output quantity is becoming Less,what’s the problem?
A3: Please inspect the vibrator, please brush off the copper granules in the vibrator’s screen.

Q4: Which kinds of cables can I processing with this machine?
A4: Auto-wire, communicate cable, and other mixed copper wire/cable, phone wires and so on.

Q5: Is there has pollution in recycling?
A5: This is dry separating, not pollution and other waste at all.