1500-2000kg/h PLC Controlling Scrap Air Conditioner Radiator Separator Machine ​

TF-500 waste radiator recycling plant is suitable for separating and recycling copper, aluminum and iron of all kinds of large radiators (copper and aluminum water tank) and electronic rotors of less than 16CM.

Industrial radiator recycling machine Features:
1. The entire production line uses the PLC automated control system to achieve coordinated work between the equipment, stable feeding and operation.
2. Simple structure, reasonable layout, strong processing capacity, stable operation, firm and durable, safe and reliable.
3. Coarse crushing uses the biaxial shredder with low rotating speed and large torque, and the cutter and shaft are specially treated with alloy materials.
4. The entire set of equipment uses the negative pressure induced air pulse dust removal system to ensure a good working environment.

Specifications of Industrial radiator separating machine:

Automatic waste radiator separating plant Description:
The waste radiator is manually put into into the first crusher, the first crusher is doubt shaft shredder,the radiator is squeezed, torn, broken into 5CM width, and the length is uneven,strip type radiator, the broken material is transported to the second crusher through discharge conveyor, and the second crusher adopts a heavy hammer crusher to smash the radiator into a sheet, and then under the belt magnetic separator of the conveyor, the iron in the material is sorted, and the remaining copper and aluminum will be transported to air sorting machine by conveyor. The sorting machine has 2 outlets, No. 1 outlet is a heavier mixture (copper and a small amount of aluminum) and the No. 2 outlet is lighter pure aluminum. The material of the No. 1 outlet is then transported by a conveyor to a specific gravity sorting machine for fine sorting, to sort the remaining copper and aluminum.. The dust collected in the first crusher, second crusher, magnetic separator and conveyor is collected by the high pressure fan to the pulse dust collector, and there is a dust outlet under the pulse dust collector, which is discharged to the storage box by the screw conveyor.

Working principle of Radiator separating line:
Radiator harmless separating and recycling machine,which adopts dry-type crusher ,magnetic separator and air separator to break and separate the radiator, turning the radiator into copper, iron and aluminum. The whole process is conducted in negative pressure.
The equipment needs hand feeding and inside hard material, such as chunks of iron or large screws, shafts, should be picked out in advance. Then after first crushing and second crushing, aluminum, iron and copper are taken off. At last, magnetic separator and air separator separate aluminum, iron and copper. Pulse dust catching system is allocated in crushing and separation part, effective solution to the dust discharge. The crushing and separation system is equipped with pulse dust collector system, so the dust problem can be solved.