25*25*0.8mm Metal Saddle Ring Packing Random Packing For Scrubber Air

Product Description:

Pall ring is a new type of random packing improved on Rasiichig ring. Compared with the later, pall ring has improved the liquid distribution of packing layer greatly, with open windows on ring sidewall. Therefore it has productivity, low resistance, operating flexible and higher efficiency. Hualai Pall ring is widely applied to industry. It is still one of major annular random packing that has been adopted. It is especially suitable for rectification towers under vacuum to treat thermosensitive, decomposable, polymerizable or cokable systems, so it is widely used in packing

towers in petrochemical industry, chemical fertilizer industry and environmental protection, etc.

Specifications:

Technical Parameters:

Features:

High resistance to fouling Multiple materials available

High temperature applications Mechanically robust

Lesser probability of breakage Good liquid/gas distribution

High mass transfer efficiency

Applications:

A metal pall ring is an efficient component used in vacuum distillation processes to facilitate heat transfer. Its unique design ensures that it maximizes the available surface area for heat exchange, thus increasing the efficiency of the distillation process. When installed in a distillation column, metal pall rings can promote the removal of impurities from the feedstock, resulting in purer distillate products.

Wet scrubbers are widely used in industrial settings to remove contaminants from gas streams. Wet scrubbers work by spraying a liquid solution onto the gas stream, which then creates a chemical reaction that neutralizes or absorbs the contaminants. The resulting by-products can then be collected and disposed of properly, making wet scrubbers an effective way to reduce emissions and maintain air quality.

Cooling towers are used to transfer heat from industrial processes to the atmosphere through evaporative cooling. The hot process water is circulated through the cooling tower, where it is cooled by evaporation. This cooled water then returns to the industrial process, where it can again absorb heat. Cooling towers are ideal when a large amount of heat needs to be dissipated from a process stream.

Mist eliminators are used in industrial processes to remove small liquid particles from a gas stream. These mist eliminators work by using a series of plates or filters that capture the liquid droplets as they pass through the mist eliminator. With the liquid droplets removed, the gas stream can be safely discharged into the atmosphere. Mist eliminators are commonly used in chemical and oil refineries, as well as in power plants and other industrial facilities that produce gaseous emissions.

Gas absorption columns are used in many different types of industrial processes to separate gases from liquids. The column contains a series of trays or packing material that is designed to maximize the contact between the gas and the liquid. As the gas and liquid circulate through the column, the desired gas is absorbed into the liquid, which is then processed and separated. Gas absorption columns are used extensively in the chemical and petrochemical industries.

Gas strippers are used in industrial processes to remove dissolved gases from liquids. The gas stripper works by creating a counter-current flow of gas and liquid, which allows the dissolved gas to be stripped from the liquid and vented to the atmosphere. Gas strippers are commonly used in wastewater treatment plants, as well as in the chemical and petrochemical industries.

Air washers are used in industrial settings to remove impurities from the air. An air washer works by drawing in contaminated air, which is then passed through a series of filters and scrubbers. The scrubbers use a liquid solution to neutralize and absorb the contaminants, resulting in cleaner air that can be safely discharged back into the environment. Air washers are commonly used in manufacturing plants, food processing facilities, and other industrial settings where air quality is important.

FAQ:

Here are some frequently asked questions and their answers about Yuanhai's Metal Random Packing (Model YH-04):

Q: What is Yuanhai Metal Random Packing?

A: Yuanhai Metal Random Packing is a type of structured packing designed for use in distillation and absorption columns. It is made from high-quality stainless steel and is highly resistant to corrosion and wear.

Q: Where is Yuanhai Metal Random Packing made?

A: Yuanhai Metal Random Packing is made in Hebei Province, China.

Q: Does Yuanhai Metal Random Packing meet any quality standards?

A: Yes, Yuanhai Metal Random Packing is certified to meet the ISO9001:2015 quality standard.

Q: What is the minimum order quantity for Yuanhai Metal Random Packing?

A: The minimum order quantity for Yuanhai Metal Random Packing is 1 m³.

Q: How is Yuanhai Metal Random Packing packaged and shipped?

A: Yuanhai Metal Random Packing is packaged in wooden boxes and shipped to customers by sea or air. Delivery time is typically 7 days from the date of order, and payment terms are T/T. Yuanhai has a supply ability of 800 cubic meters per month, and prices are negotiable depending on the size of the order.