PVC Coated Welded Wire Mesh Gabions Rectangular Wire Mesh Baskets

Product Description:

PVC coated welded wire gabions are made of single unit construction. The base, lid, ends and sides shall be either woven into a single unit or edge of these members connected to the base section of the gabions. Therefore the strength and flexibility at the connecting point does not compromise the engineered structural design of the plastic coated gabions. The selvedges of the PVC coated wire mesh gabions are the thicker perimeter and the edge wires are secured as to withstand sudden or gradual stress from any direction. The lacing or tie wire is used to assemble and join the gabion units. While the connecting wires are the internal wires used to prevent the gabion from bulging. With such reasons, plastic coated welded wire mesh gabions are widely used for various applications including but not limited to retaining walls, mechanically stabilized soil retaining structures, stream and river bank protection, slope paving, outfall structures, weirs and drop structures and so on.

Standard size

• 2m x 1m x 1m
• 2m x 1m x 0.5m
• 1m x 1m x 1m
• 1m x 1m x 0.5m
• 1.0m x 0.5m x 0.5m
• 0.5m x 0.5m x 0.5m
• 3m x 1m x 1m
• 3m x 1m x 0.5m

welded mesh Gabion baskets wire as buyer's requirement.

Welded mesh gabion Features:

PVC coated gabions enjoy many excellent advantages, such as corrosion resistance, weather proof under natural destroy, simple installation, easy transportation, no collapse even under big scope of deforming, and good permeation that can prevent the damage by hydrostatic. Besides these, PVC coated wire gabions are also good for plant growing and the gabions mixed to form a integrity with the natural environment.

How to install welded gabion box:

After checking you have all the components, open out the mesh panels.

Lift the side panels into vertical position and join by feeding the correct length of helical formed spiral into the corner, using a rotating action, until the helical is fully engaged.

When the helical is fully engaged, the formed end should lock in place.

All panel joints (vertical joints) are formed by assembling to the adjacent panel. Each joint is retained with one helical. 

Repeat the filling and stiffener wire installation until the gabion is full and then close the lid by joining with the correct helical while ensuring the top mesh bears down on the rock fill.

Applications:

PVC coated gabions are wire fabric containers, uniformly partitioned, of variable size, interconnected with other siar containers and filled with stone at the site of use, to form flexible, permeable, monolithic structures such as retaining walls, sea walls, channel linings, revetments and weirs for earth retention. Some common applications include water, soil, coast, bridge or road protection, rock breaking prevention and seaport engineering. They are also very useful in control and guide of water or flood