Stainless steel square u shaped tube bracket fabrication

Bending - the material is deformed or bent along a straight line.
Flanging - the material is bent along a curved line.
Embossing - the material is stretched into a shallow depression. Used primarily for adding decorative patterns. See also Prepossess and chasing.
Blanking - a piece is cut out of a sheet of the material, usually to make a blank for further processing.
Coining - a pattern is compressed or squeezed into the material. Traditionally used to make coins.
Drawing - the surface area of a blank is stretched into an alternate shape via controlled material flow. See also deep drawing.
Stretching - the surface area of a blank is increased by tension, with no inward movement of the blank edge. Often used to make smooth auto body parts.
Ironing - the material is squeezed and reduced in thickness along a vertical wall. Used for beverage cans and cartridge cases.
Reducing/Necking - used to gradually reduce the diameter of the open end of a vessel or tube.
Curling - deforming material into a tubular profile. Door hinges are a common example.
Hemming - folding an edge over onto itself to add thickness. The edges of automobile doors are usually hemmed.
Piercing and cutting can also be performed in stamping presses. Progressive stamping is a combination of the above methods done with a set of dies in a row through which a strip of the material passes one step at a time.

Surealong Group Corporation specialize in Metal stamping, metal(Steel, copper, Al, stainless steel etc.)fabrication, CNC Machinig, Laser cutting,welding and assembly. Since Surealong founded in 2010, he have been developed on low voltage component, illuminate component, automatic component, medical equipment component, communication component and precision equipment component etc. scope, and now more than 200 Surealong people commit themselves on develop this scope and new scope.

Total area of workshop is more than 6000 sqm,equipped 70 pressing machine with the tonnage ranging from 3 to 300 ton,and with supporting equipment for perform production from developing to mass production.

Professional Experience:
Committed in stamping and assembly production for years,we have obtained abundant experience on this field which can satisfy most of client's requirements. In compliance with drawing or samples from customer,to provide full service from tooling design to mass production, there are around 20 skilled engineer for tooling design and process technics, the lead-time from development counts from 3 days the shortest only and generally 2 weeks.