Features | Test Method | Results |
Caliper, face film | GB/T6672-2001 | 100±10micron (μm) |
liner | GB/T4669-1995 | 120±5g/m² |
Dimensional stability | FINAT-14 | Max. 0.8 mm |
Adhesion, initial(175*25mm) | FINAT FTM-1, stainless steel | ≥10N |
Adhesion, Ultimate(175*25mm) | FINAT FTM-1, stainless steel | >=11N |
Release | FINAT-4 | 15-25g/inch |
Shelf life | Stored at 24° C/50-60 % RH | 12Months |
Durability | Vertical exposure | 12Months |
Applications 1.Anti-counterfeiting mark
2.Point-of-purchase signs
3.Advertising lettering Car stickers


Advantages
1.Rich hallucinatory dynamic effects
2.When viewed from different angles, it can show brilliant and colorful colors
3.Low residue in short term
4.Good dimensional stability after application Shelf Life, Shipping, and Storage
1.All DPI products should be stored in original packaging with original protective materials. It is recommended to keep them sealed and placed
horizontally. Stacking height should not exceed 6 layers, avoiding direct sunlight and heat source After contact. Storage temperature 25±5ºC,
relative humidity 50±15%. In this case, the shelf life of the product is 12 months.
2.Ship the finished graphic lying flat or in a roll. To roll the graphic, roll it film side out onto a core that is 3 inches or larger in diameter. These
methods help prevent the film and application tape from wrinkling or popping off the liner.
Thermal
Construction temperature: 20°±10ºC
Temperature range: -20°+60° C
Chemical
Resistant to most petroleum based oils, greases and aliphatic solvents
Resistant to most mild acids, alkalies, and salts
Warranty The materials are manufactured under careful quality control and are warranted to be free from defect in material and workmanship. Any material shown to our satisfaction to be defective at the time of sale will be replaced without charge. Our aggregate liability to the purchaser shall in no circumstances exceed the cost of the defective materials supplied. No salesman, representative or agent is authorized to give guarantee, warranty,or make any representation contrary to the foregoing.
Important Remarks
All DPI material instructions, technical information and application recommendations are based on what we consider to be reliable typicality test results, for special countries environment or special application, you can contact with our technical department to develop corresponding products to meet customer needs.
Other Products