EN1433 Gully Grating Double Triangle , Cast Iron Gully Grate STEADY POWER Model

Ductile Iron Gully Garting Double Triangle

Ductile cast iron GJS/500/7 - EN 1563 gully top, STEADY POWER model, produced, according to provisions of UNI EN 124 latest edition, consisting of a square fra_x0002_me at both the supporting base and top corresponding to the street level, provided with: specific outer continuous winglet with round corners on all four sides, in order to supply a greater supporting bottom and a better anchoring to the foundation also by holes/elongated holes useful for the fastening with anchor bolts, reinforcing ribs; holes for the grate’s joint; preset internal winglets on the four corners to house a siphon. Square grate provided with : holes for the grate’s joint; locking device made by elastic tongues that locks under the frame tongue and unlocks with a generic lever; parallel slots placed on two or more slots , pair of nuts and bolts properly housed in specific holes to allow the positioning of the grating in to the frame and prevent its theft and forcing; central concavity, where suitable, to carry out the minimum

useful slope; anti-slipping patterns.

Applications:

Class Apply to Bearing Remarks
EN124-A15 Areas where only passed by Pedestrians and Bicycles. 15KN
EN124-B125 Footways, parking lot or similar areas. 125KN HOT-SELLING
EN124-C250 The edge combinative area of vehicle road and the pavement. 250KN

EN124-D400 Vehicle area and urban arterial road. 400KN HOT-SELLING
EN124-E600 Shipping port and parking apron area. 600KN

EN124-F900 Airplane taxiway and huge dock. 900KN

Specifications:

Competitive Advantage:

Put damage:

This is the biggest characteristic of ductile iron manhole covers, ductile iron manhole covers can be heavy pressure 36T/60T, light can be confined 21T. Even if the load pressure exceeds its limit, ductile iron manhole cover cast iron manhole cover is not as common as broken, but a slight deformation of the car and pedestrians has a certain security.

Anti-shock:

only through the mouth of the Manhole set to U-shaped, with a T-type synthetic rubber, U-shaped slot embedded in the contact Manhole covers and the process in order to cushion and reduce the vibration force.