380V 15T Metal Roofing Double Layer Forming Machine With PLC
1. Brief introduction of Double Layer Forming Machine
Double layer forming machines for roofing and cladding sheets , with the greatest advantage is one double layer machine can make two design sheets.
usually, one layer forming machine or single layer forming machine only make one roofing design.
Therefore, if customer has limited install space and required to make two roofing designs, double deck machine is best choose.
shall we introduce you difference between one layer machine and double layer machine?
one layer machine include 5 ton manual decoiler, forming machine with post cut, hydraulic station, plc controller run out table.
double layer machine have additional set rollers and cut blade for another roofing design. that is , two sets rollers share with one machine base, motor , hydraulic station, plc controller and cut frame.
therefore, double layer forming machine only work one layer at one time.
Recently, double layer machine cut controlled by motor is adopted, it is good use in hot area, because, traditionally, hydraulic station give power to cut action, if in hot area, the oil in hydraulic station will very hot.
while motor control cut in hot area is good idea.
2. Specifications of Double Layer Forming Machine
Material | Applicable material | GI(Galvanized Steel Sheet)/PPGI |
Material thickness | 0.12-0.5mm | |
With yield strength | 235-345-550Mpa Yield Strength | |
Machine | Base frame | H400 type steel |
Roller material | 45# steel | |
Hardness | Heat treatment to HRC58-62 degree | |
Roller station | 15/15steps to form | |
Shaft diameter | 80mm/ 75mm | |
Machine size | 10000*2000*2000mm | |
Machine weight | 15000kgs | |
Machine color | 2.Blue(RAL5015)+ orange (RAL2004), as per the seller factory’s color standard | |
Working speed | 15m/min | |
Cutter | Hardness | Heat treatment to HRC58-62 degree |
Cutting tolerance | ≤±1mm | |
Material | Cr12MoV(= Z200C12 with at least one million times of cutting life) | |
Operate | By PLC | |
Power | Driving way | Gear/Sprocket transmission, |
Main motor | 11KW | |
Pump motor for cutter | 4kw | |
Voltage | 220/380/415/480V- 6050Hz/3Ph --should be confirmed | |
PLC Control System | Inverter | Siemens |
Touch screen | Siemens | |
Encoder | Siemens | |
Cut-to-length tolerance | ≤±1mm | |
Control voltage | 24V |
3. Customer Feedback of Double Layer Forming Machine
1) Engineer will give free training lessons to labors in buyer's factory.
2) The Buyer will buy the round-trip air ticket for Engineer if visa application is approved. The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD150 per day for engineer.
3) During this guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, we will provide the buyer spare parts at cost price.
4). We will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide.
4. details photos of Double Layer Forming Machine