Heavy Duty Large Gauge HR Steel Coil Slitting Machine For 16 X 2000 Q195, Q235, 08steel

Our heavy gauge steel coil slitting machines now are becoming popular in market, 8 x 2000 double heads slitting line to Algeria and Russia, 16 x1650 HR slitting line to Malaysia, 12 x 2000mm slitter, etc. each slitting machine is customized.

Thick coil sheet slitting in longitudinal direction, like 8mm, 10mm, 12mm, 14mm 16mm normal carbon steel, or high tensile heavy gauge slitting, e.g. 4mm, 5mm, 6mm, 7mm, 8mm, 12mm, etc..., the slitting machine bear heavy duty and machine structure is robust structure and automatic operation.

Characters :

1. Big baffle double heads uncoiler: thick steel coil plates are often heavy with big outer diameter, coil weight maximum can be 30-40T and outer diameter is up to around 2200mm. The inner coil diameters are not so regular, looking an oval shape, the opposite two cone mandrels can easily support coil inside.
2. Strong double pinch rolls and 5 rolls pre leveler before slitting: thick plate was wound up to become coils in rolling line, the coiling radius of strips is strong, strong leveler can flatten the coil bending radius to become flat, ready for later slitting.
3. Five roller tensioner: The five rollers tension is 3 over 2 roller structure with gear drive, keeping steel strips under stable recoiling tension.
4. Strips separating press frame over recoiler: To ensure continuous recoiling, each strip must be held in order and tightly one layer over the under layer, hydraulic separating press frame solidly stand on foundation, pressing separating shaft onto recoiling strips by two hydraulic cylinders.
5. Slitter and recoiler: Structure looks the same, but much stronger, and some parts adopt special material. Slitting and recoiling work in synchronization by rotary encoder PLC control.
6. Motorized adjusting side guide: for thickness gauge sheet, the side guide adjusting is motorized by pressing button on panel.
7. Two scrap winders at each side: independently driven by a big AC frequency motor, with scrap winding displacement, hydraulic push off the wound scraps..
8. Electric control: main drive cabinet is behind the slitting machine on drive side, operator panels sit in front of the machine, which has touch screens and Siemens PLC.

Composition and Parameters: