Description

The high-strength structural steel at 960 MPa

S960MC steel is a hot-rolled structural steel made for cold forming, with a minimum yield strength of 960 MPa.

S960MC steel meets and exceeds the requirements in EN 10149-2. These cut-to-length sheets feature excellent thickness accuracy and surface quality in relation to strength level, providing an outstanding finish to the final products.

Typical applications include advanced lifting devices such as mobile cranes and lighter transport solutions and components.

Dimension Range

S960MC steel is available as cut to length with mill edge in thicknesses of 3.00 - 10.00 mm, widths up to 1600 mm and lengths up to 13 meters.

Mechanical Properties

The mechanical properties are tested in the longitudinal direction.

(1) If ReH is not applicable then Rp 0,2 is used.

(2) For both longitudinal and transverse direction.

Impact Properties

Impact testing according to EN 10149-2 ( -20 °C /minimum 40J) is available if specified at the time of order.

Impact testing according to EN ISO 148-1 is performed on thicknesses ≥ 5mm. The specified minimum value corresponds to a full-size specimen.

Chemical Composition (ladle analysis), %

The steel is grain refined.

Sum of Nb, V and Ti = max 0.18%

Thickness

Tolerances according to EN 10051.

Length and Width

Width and length tolerances according to EN 10051. Length tolerances only apply for cut to length sheets.

Shape

Tolerances according to EN 10051. Narrower tolerances are available on request.

Flatness

Tolerances according to EN 10051.

Flatness guarantees only apply for cut to length sheets.

Surface Properties

According to EN 10163-2 Class A, Subclass 3.

Delivery Conditions

S960MC steel is supplied in as rolled surface condition, pickled surface is available in a limited thickness range. The product is thermomechanically rolled.

Fabrication and Other Recommendations

S960MC steel has good welding, cold forming and cutting performance.

S960MC steel is not suited for applications requiring hot working or heat treatments at temperatures above 400 °C since the material then may lose its guaranteed properties.

Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the product.

Specification

Plate thickness: 4-100mm

Width: 500mm – 4700mm

Length: On request

Production process

产品标题